English
See More
Long Arm Aerator 10 Impeller / skype : LD0228
1.Main parts of Tartary buckwheat dehulling and separating equipment: refining pot , decoloration pot ,deodorization pot , oil pumps and other parts
(1) Long Arm Aerator 10 Impeller / skype : LD0228Purpose:
Long Arm Aerator 10 Impeller / skype : LD0228 is according to the different usage and requirements, utilizing the physical methods and chemical processes to get rid of the harmful impurities and needless substance in the crude oil, getting standard oil.
(2)Tartary buckwheat dehulling and separating equipment is suitable for refining various crude vegetable oil, such as sunflower seed oil, tea seed oil, groundnut oil, cottonseed oil, palm oil, rice bran oil, soybean oil, corn oil and palm oil, etc.
(3) Advantage of Long Arm Aerator 10 Impeller / skype : LD0228: a . After refining the impurity of oil must be less than 0.2% ;
b. Recycling system save power and money ;
c. Lower oil waste.
2.Working process of Long Arm Aerator 10 Impeller / skype : LD0228
(1)Long Arm Aerator 10 Impeller / skype : LD0228Pump crude oil into refining tank and heat with conduction oil, and the temperature will reach about 70°C-80°C after one hour. Add acid or alkali to separate according to the acid value. After one hour's processing and 4-6 hours deposit, then convey soap stock to storage tank.
(2)Tartary buckwheat dehulling and separating equipmentPump refined oil into decoloring tank. When it is up to 90-110°c after one hour's heating,add clay into tank for 20min's processing. Then separate clay and oil with filter.
(3Long Arm Aerator 10 Impeller / skype : LD0228)Put discolored oil into deodorization tank with vacuum pump. Heat and process with steam for odor removal.
(4)After filtering of Tartary buckwheat dehulling and separating equipment, you will get final oil product.
high quality impeller aerator for the fishery/aerators for aquaculture 0086-15838061759
Specification for impeller aerator/impeller aerator
Through deep investigation of feedback information concerning impeller
aerator quality, we have developed an impeller aerator that is designed to
avoid engine burn out and gear damage.
Features:
1) Built-in protector will jump off automatically so as not to burn down the
engine if the lack phase of tri-phase source or engine overheating occurs
2) The gear is made using chromium-manganese-titanium alloy steel
immersed in carbon and nitrogen, which can prolong the life span
3) Using a patented technique, the non-welded impeller can run stably, and
is easy to carry around
4) To ensure permanent application under strongly corrosive conditions
(seawater or industrial sewage) without replacing the impeller or painting,
we have developed engineering plastic impellers and stainless steel
impellers according to different environments and customers' special
Features :
The gearwheel in the reducer is made of nice compound metal, which can extend the reducers life.
1.High efficiency and saving over 20% electric energy than traditional models.
2.Mechanical seal is available to against oil leak pollution.
3.Built-in protector is available to avoid motor being burnt accidentally.
4.The floating boat produced by our company is made of good engineering plastic. It has great buoyancy and high strength.
5.The impeller is made of nice plastic. The spoke and vane is shaped with plastic only one time.
6.The flexible gearing is fixed by the stainless wheel bolt.
7.Oxygenation rate:2.5kg/h.
8.Outer packing:carton.
9.Easy maintenance.
10.Stainless steel frame is sturdy,without deformation and high durability.
11.Can be used both on freshwater and seawater.
High oxygenation performance :
1, High quality motor expertise design for aquaculture industry
2, Low friction gear reducer with low resistance to decrease energy losses
3, Sturdy stainless steel Frame ensure without any deformation and high durability
4, High performance impeller, replaceable paddle,low maintain cost
5, HDPE float resist impact, acid-alkalinity and sun exposure, one piece blow molde.
Parameter:
Impeller type aerator
Model |
Motor |
Voltage |
Power efficiency |
Oxygen transfer rate |
Active area |
SLYL-1.5 |
1.5KW |
220V/380V |
â¥1.4kg/kw.h |
2.25kg(O2)/h |
4-8mu |
SLYL-2.2 |
2.2kw |
380V |
â¥1.4kg/kw.h |
3.37kg(O2)/h |
5-10mu |
SLYL-3 |
3KW |
380V |
â¥1.4kg/kw.h |
4.5kg(O2)/h |
7-12mu |
Paddle wheel type aerator
Model |
Power |
Horsepower |
Voltage |
Aerobic capacity (kg/h ) |
SL-Z-2 |
0.75 kw |
1HP |
220 V |
â¥1.1 |
SL-Z-4 |
1.5 kw |
2HP |
380 v |
⥠2.3 |
SL-Z-6 |
2.2 kw |
3 HP |
380 v |
⥠3.4 |
Shandong Microwave Machinery Co.,Ltd.is a Tartary buckwheat dehulling and separating equipment factory specializing in the production of Long Arm Aerator 10 Impeller / skype : LD0228, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Tartary buckwheat dehulling and separating equipmentcustomers with design and services of 1-2000 tons Long Arm Aerator 10 Impeller / skype : LD0228. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Tartary buckwheat dehulling and separating equipmentover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Tartary buckwheat dehulling and separating equipmentoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Tartary buckwheat dehulling and separating equipmentequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: sales10@ldfoodmachine.com
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)
Crispy Rice Food Processing Line
