English
See More
The Mini LD Dryer YC-015 is the result of 15 years continuous development ,is your choice for the quick and gentle drying to powder of material. The impressive features of the LD Dryer include its efficient performance with very short set-up times,an effective integrated nozzle cleaning mechanism and a high degree of flexibility thanks to the different cylinder geometries. The system was desityed to be stand by a keyboard, conducted by a colorful crystal screen of touch guidance mode , and allowed two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process .
1.Color Touch Screen,Fast setup and cleaning times
2.Scale up to pilot or industrial scale possible.
3.Visible process due to glass assembly
4.Adjustable particle size (1 – 25 microns)
YC-015 mini LD dryer is desityed to ensure that all functions are simple to select and adjust, to quickly achieve the optimum conditions for LD drying. Both use a clear touch screen Display , the operator can control the following functions:
• Inlet Temperature
• Airflow Volume
• Air compressor flow
• Pump speed
• De-blocker Frequency
The minimum of materiel only needs 20-30 ml, which is convenient for dealing with small amount of sample, and it's maximum Capacity can up to 2000ml/H as well as the dealing with vast material is also very rapidly.
The heater has an extreme high temperature when experiment finished, which needs air blower to continue worldin order to reduce the inside temperature and ensure the safety of equipment, YC-015 LD dryer can control air blower running automatically, even the operator wants to turn off the air blower, the system would prevent the operator until the temperature of system reduce to the defauLD security state of system .
Oil free compressor built-in with cushion technique, lower noise and convenient to move the dryer. Compressed air container made from the SUS 304 stainless steel to avoid vapor corrosive damage.
The stainless steel LD assembly consists of an inner tube for the sample LD to a small diameter jet. An outer tube directs compressed air to the nozzle. All units are supplied with 0.7mm jets, other sizes are available as accessories.The LD assembly incorporates an automatic de-blocLD device that prevents the jet nozzle from becoming blocked, the de-blocLD needle is activated by an integral compressor. De-blocker is sometimes necessary with materials which may solidify or when large particles in suLDension cause blockages in the jet.
LD chamber, cyclone separator, collector are all made of Borosilicate glass which can resist strong acid/altali, high temperature. It can work in a no-pollution and stable environment, and the whole process can be inLDected. And we can provide SUS 304 stainless steel parts .All the LDare parts are easy to install and clean.
1 |
Power |
3500W |
2 |
VoLDage |
220V,50/60 Hz |
3 |
Atomizer material |
SUS 316 Stainless steel |
4 |
Evaporating Capacity |
1.5 l/h for water |
5 |
Airflow |
0-330 m³/h |
6 |
max. Input temperature |
250°c |
7 |
Heating Capacity |
3000W |
8 |
Heating control |
±1°c |
9 |
LD gas |
4.2m³/h, 2-5bar |
10 |
Nozzle tip diameter |
0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available) |
11 |
Nozzle LLDe |
Two fluid nozzle |
12 |
Possible particle diameter range |
1-25µm |
13 |
Mean Residence time |
1.0-1.5 sec |
14 |
Operation mode |
Automatic/Manual |
15 |
Max. Sample feed |
2000ml/hr |
16 |
Minimum sample volume |
30ml |
17 |
LD chamber material |
borosilicate glass |
18 |
Cyclone separator material |
borosilicate glass |
19 |
Receiving tank material |
borosilicate glass |
20 |
body material |
SUS-304 Stainless steel |
21 |
Seal of cyclone/cylinder |
Silicone |
22 |
Compressor |
built-in oilless |
23 |
Sound |
|
24 |
Dimensions |
750*650*1200mm |
25 |
Weight |
110KG |
26 |
Display |
7-Inch LD Display for Heat, LD, Pump, Air pressure, de-blocker frequency |
27 |
protection |
Blower does not stop until temp |
28 |
DeblocLD |
Automatic |
29 |
Inert loop (for organic solvents) |
Optional |
YC-015 mini LD dryer can be used in a wide range of applications where the production of a free-flowing powder sample is required.This technique has succeLDully processed materials in the jet
• Oxide • Blood • Polymers and Resins
• Beverages • Flavours & Colourings
• milk & Egg Products • Plant & Vegetable Extracts
• Pharmaceuticals • Heat Sensitive Materials
• Plastics • Perfumes • LDestuffs
• Ceramics & Advanced Materials
• Soaps & Detergents •Textiles
• Foodstuffs • Adhesives
• Bones, Teeth & Tooth Amalgam and many others
1.A menu driven microprocessor controller allows the selection of inlet temperature, airflow, automatic de-blocker frequency and pump speed.
2.The self-priming peristakeic pump vers the sample from a container through a small diameter jet into the main chamber. At the same time an integral compressor pumps air into the outer tube of the jet which causes the to emerge as a fine atomised LD into the drying chamber.
3.Heated air is blown through the main chamber evaporating the content of the atomised LD. The solid particles of the material, which are normally in a free flowing state, are then separated from the exhaust air flow by a cyclone and collected in the sample collection bottle. The exhaust airflow is directed through a flexible 60 mm diameter hose direct to atmoLDhere or to an existing extraction system.
Our company's laboratory equipment is widely used by well-known universities in China such as Tsinghua University, PeLD University Fudan University, Jinan Jiaotong University, Hong Kong University of Science and Technology, Wuhan University, Huazhong University of Science and Technology, Sun Yat-Sen University, Jinan University and Nanjing University, and world-renowned companies like Coca-Cola and General Electric. It has more than 1,500 users in mainland China.
 
|
Do all products have English operating interfaces and operating manuals? |
| Yes, all our equipment has English operation interfaces, and if necessary, we are also able to provide the edition in the user's native language, and all products are available in English operating instructions; if necessary, we can also provide the user's desired language version. In addition, there are are operating videos for our products for the convenience of customers to use. Q:How is the after-sales service of your company? | |
|
|
How is the after-sales service of your company? |
| We offer one-year quality guarantee for all the products, and for products within the warranty period, we provide free services for all damages not resulting from human beings. After the warranty expires, we will charge cost price only . | |
|
|
How is the stability and durability of your products? |
| The company has been established for over 10 years, and our products have been adopted by 90 percent of colleges and universities in China. The earliest products are still used by customers at present; they are really durable. In China, before purchasing our equipment, many teachers in university will listen to the views of colleagues carefully. Pilotech's equipment is reputed for its good performance and stability, and numerous new customers are recommended by old customers. | |
|
|
As for the overseas market, what kind of policy does Pilotech have on dealers? |
|
Pilotech welcomes dealers worldwide to sell our products, and we will provide dealers with strong technical support and competitive prices. Pilotech hopes to grow and develop together with distributors from different countries.
|
Crispy Rice Food Processing Line
