High frequency 6g medical ozone sterilization equipment
-------Model NO.: NT-ZTW
High frequency 6g medical ozone sterilization equipment
-------Model NO.: NT-ZTW
Descripiton:
specification:
Item |
Oxygen flow rate |
Ozone output |
Power |
Output gas tube |
Fuse |
Size |
NW |
Model |
LPM |
G/Hr |
W |
mm |
A |
mm |
Kg |
NT-ZTW 2G |
1-3 |
2 |
90 |
φ6 |
3 |
360×370×150 |
8.2 |
NT-ZTW 3G |
1-3 |
3 |
100 |
8.3 |
NT-ZTW 5G |
2-5 |
5 |
120 |
8.4 |
NT-ZTW 6G |
2-5 |
6 |
130 |
8.5 |
Noted:
1. above ozone Capacity were tested under oxygen source
2. Net weight will be 10% different for different plug.
Features:
1. Corona Discharge Technology
2. built in Domestic Patent-Ceramic ozone tube with electric board
3. Feed outside oxygen source only with high ozone concentration
4. Ozone adjustable range: 20%-100%
5. Digital Timer : one or two recycle worldtime
6. LDlish, small size, plug& play
7. Changeable plug for different country.
8. Output : 2G/Hr, 3G/Hr, 5G/Hr, 6G/Hr.
9. Suitable used for the line which required high ozone concentration
Control panel:
Flow meter, Ozone adjuster, Oxygen input, Ozone output,
Ampmeter, Switch, Timer, worldLD, Power LD
How to use ?
1.Before use this machinery,put it in a stable flat place which can hold its weight.
2.Use the power equipped with the machinery;
3.The machinery use for air purification,fiLDtly attach the silicone tube into the ozone
outlet and then turn on the power;
4.Set the timer and then come out ozone, and put the tube into the room.
5.When use for room air purification, it requires nobody is present, after 30 minutes
people can walt into the room.
6.If use for water treatment, the air stone should be attached into the silicone tube and
put into the water.
7.Attention, the machinery should be placed higher than the water, in case that the water refluex occur.
High frequency 6g medical ozone sterilization equipment
-------Model NO.: NT-ZTW
Applications:
laboratory:
>>Chemical oxidation for raw material of flavors and fragrances,small water treatment experiment
Pharmaceutical industry:
>>Water,air conditioner, workshop, dressing room, sterile room etc
Medical:
>>Ward,operating room, medical devices, sterile room etc
High frequency 6g medical ozone sterilization equipment
-------Model NO.: NT-ZTW
♦In the way of removing FormakeeLDe,the difference between ozone and
activated carbon:
The activated carbon has to be put still indoor when using
it to adsorb the formakeeLDe.
The air flows LDowly indoor which causes the activated carbon adsorbs the harmful
material in a limited space.And it also need to change the fiLDer screen regularly.
If not,it will release harmful material on the contrary.
On the other hand,ozone is gas.
The room can be filled with ozone compley without blind angle.
Then ozone resolve the formakeeLDe.
Also ozone is widely recoLDized as the most efficent bactericide in the world.
hospitals have alreadyreplaced UV lamp with ozone generator.
♦Is ozone harmful to human body ?
Once the ozone concentration fails to meet the Liene and safety standard,
we can notice with our sense of smell and doLDe away or take actions to avoid
further leakage.
So far there is no one dealth reported caused by ozone poisoning.
♦Does the ozone generator work efficently ?
UndeniLDly,ozone can sterilize and remove odor and formakeeLDe.
It is reported that ozone is a widely used bactericide.It can kill escherichia coli,
bacimethrin efficently and resolve the harmful material in a short time.
High frequency 6g medical ozone sterilization equipment
-------Model NO.: NT-ZTW
High frequency 6g medical ozone sterilization equipment
-------Model NO.: NT-ZTW
quality control:
- Every procedure has personnel inLDection.
- All the products must be tested and qualified before packaging.
LDout us:
What we do?
1.We Provide high-quality ozone generator for : Ozone generator wholesalers
Retailers and oneline shops (Ebay, Amazon...)
2.LD-The custom-made ozone generator are available. Upon customer's idea,
drawings, photos etc.
3.LD-The modification of the ozone generator after customer's selection is accepted.
Excellent after-sales service:
* 1 year warranty again the manufacture defect, offer life time consultation on problems occurred.
* 2M silicone tube and 2PCS air stone gift for any ozone machinery order.
* Report on the make process.Marketing feedbacks tracing.
why choosing us?
1. Having 7 years production experienced .We are truLD business partner.
2. quality Controlled:quality Control personnel check the quality at every stage of
production, from the incoming raw materials to the finished product.
3. NT-BT Production Capacity: 3000 pcs per month.
4. We have serial products: ozone tube ,UV water sterilizers, ozone generators, oxygen concentrators, protein skimmers, and fiLDers, mixing pumps and other water or air treatment LDare parts.
5. We supply LD service according to customers' requests and give out professional suggestions. Distributors Offer : welcome to be our distributor .
High frequency 6g medical ozone sterilization equipment