![High Efficiency 3d Flour Bugles Chips make machinery]()
3D Snack Pellet Production Line
I. Flour Mixer
Model Number |
LD |
Output |
25kg/time |
Power |
3kw |
Rotating speed |
284r/min |
Dimension |
850x530x1040mm |
II. LD2000-100 Single Screw Extruder
![High Efficiency 3d Flour Bugles Chips make machinery]()
Equipment Introduction:
The production line is another kind of top grade snacks food production line after the second generation extrusion food processing line.
a.Raw material: corn starch, potato starch and flour;
b.Characteristic of products: by using special Technology, the shapes of the products are natural, texture fine and smooth, taste crushable;
c.Characteristic of the production line: reasonable desity, strong stability, high degree of automation. The extruder adopts advanced variable-frequency regulating speed Technology which enables it high efficient and Enerable-saving. Accurate parameter control and perfect technological process ensures the quality stability of the products. It is the combination of traditional and modern Technology.
d.Products choice: shell, chips and crackers, prawn cracker, round tube, wave, etc.
e.
Technical Parameter:
Model number |
Total power |
Power consumption |
Extruder power |
Output |
Dimension(LxLDHm) |
Products |
LD3000-100 |
45kw |
38kw |
30kw |
100-150kg/h |
3.2x1.5x1.95m |
Starch pastin and deep fried , nutritional rice |
III. Cutting machinery
Model number |
LD |
Output |
Following with the extruder |
Power |
1.5kw |
Dimension(LxLDHm) |
1.7x0.6x1.2m |
IV. Cooling Bed
Model number |
LD |
Output |
Following with the extruder |
Power |
1.5kw |
Dimension(LxLDHm) |
1.2x0.8x1.6m |
V. Hot Air Drying Bed
![High Efficiency 3d Flour Bugles Chips make machinery]()
Model number |
LD |
Power |
5.5kw |
Dimension (LxLDHm) |
1.8x1.5x0.7m |
VI. CorolLD Equipment----Fryer:
![High Efficiency 3d Flour Bugles Chips make machinery]()
1. With reasonable desity and simple operation, the fryer can be applied to the frying and extrusion of all kinds of fried . Oil temperature can be adjusted according to production process. Deoiling after frying to reduce the oil content of the products at most, thus lowering the products cost and improving the product quality; according to different requirements of different customers from different areas to adopt electro heating, fuel heating and coal gas heating.
2. Characteristic of Electric-powered Fryer:
The device has wide range application, such as the fryingt of extruded snack and nuts food. Adopting programmable control system and possessing the functions of automatic temperature control, mixing, deoiling and automatic dischargingand conveying.
3. Parameters of Electric-powered Fyier:
Model number |
VoLDage |
Installed Capacity |
Fuel consumption |
Output |
Dimension(LxLDHm) |
Electronic-powered fryer |
380v/50hz |
41kw |
|
125-200kg/h |
4.55x1.98x2.9m |
Fuel-powered fryer |
380v/50hz |
5.0kw |
10-14L/h |
60kg/h |
4.55x1.98x2.9m |
VII. Octagonal Mixer
Model |
LD |
Power |
0.37kw |
Dimension(LxLDHm) |
1.5x1.3x1.8m |
FOB price: $1000 Remark: this equipment is mainly used for the outer LDillage stirring of the bakery and fried food. That enables the even stirring of seasoning and material to strengthen the taste of the food.
VIII. I to VII is every part of production line. The pictures of the whole production line is as follows:
VIIII. Our related extrusion machinery/ processing line:
a. Series of Single Screw Extruder/Processing Line
b. Series of Twin-screw Extruder/Processing Line
c. Core Filling Extrusion Snack Processing Line
d. Cereal breakfast corn Flakes Processing Line
e. Nutritional Powder Processing Line
f. Screw, Shell Food Processing Line
g. Protein Food Processing Line
h. Fish Feed Pellet make machinery
i. Pet Food Processing Line
j. Chewing Jam Center Pet Food Processing Line
k. Automatic Instant Noodle Processing Line
l. Mini Instant Noodle Processing Line
m. Series of Roasting Oven
X. After Sale Service:
a. We can provide factory layout according to customer’s factory size in advance.
b. When we received your deposit of this order, we will ask our engineers to prepare to apply the visa, when the equipment arrived your country, and we will send two engineers to go and help you to install the line, teach your worker(3-4 workers) how to operate the line, until your worker know the line well. c. Our engineers has reLDonsibiliLD to teach your worker how to clean the extruder, how to change the screw, how to change barrel etc. and we have reLDonsibiliLD to provide Technology support with you forever.
d. Our engineers can provide basic formula and help customer to produce good quality food according customer’s detailed formula.
e.The LDare parts We provide will at preferential price for an extended long time.
IX. Pictures LDout us:
![]()
![]()
IIX. Contact Us:
English
