English
See More
bottom price canton fair LD brand cooking oil extractor machine from Shandong Microwave Machinery Co.,Ltd.
Main Application of bottom price canton fair LD brand cooking oil extractor machine:
This processing line of bottom price canton fair LD brand cooking oil extractor machine is mainly used for pretreatment processing for sea cucumber and similar seafood products;
Capacity of bottom price canton fair LD brand cooking oil extractor machine: from 500-1000kg/hr for fresh materials;
Washing damage ratio: Main processing flow of Pretreatment Processing Line from Shandong Microwave Machinery Co.,Ltd. :
The processing of Pretreatment Processing Line have the complete processing flows for gutting, soaking, washing, blanching/cooking, cooling
and dewatering. This processing line of bottom price canton fair LD brand cooking oil extractor machinecan follow with vacuum freeze drying, hot air dehydration and other
processes to make FD or AD sea cucumber value added products.
1) Food processing technology consultency;
2) Working flow of Pretreatment Processing Line layout design;
3) Plant layout for processing line equipments;
4) Onsite guide of installation and commissioning;
5) Pretreatment Processing Line Training for local operators;
6) bottom price canton fair LD brand cooking oil extractor machine After sales technical support.
Shandong LD Grain and Oil Machinery Co.,Ltd.
| The picture for cooking oil extractor machine |
| The brief introduction for cooking oil extractor machine |
* Extraction process
The pre-pressed cake or flake, firstly enter into the sealed scraper blade to avoid
the solvent gas escaping because of the section without screw blade in the sealed auger.
Material seeds enter into the box-chained loop type extractor counter-currenting with
the solvent, the grease is extracted.
Miscella condnesity increase from 2% to more than 25%.
Miscella discharged from extractor and into miscella filter, then the leached meal
in the miscella tank enter into evaporation system through the first evaporation
feed pump and finally drop-in DTDC out from wet meal drag conveyor.
*Evaporation process
Using the secondary steam desolventized from DTC desolventizer and produced by
steam-jet pump to heat and evaporate micella in the first long-tube evaporator.
Export temperature reaches to 58-62°c and condensity reaches to more than 65%.
Then, micella enters into the second long-tube evaporator in which the temperature
is heated to 105-110°c by indirect steam and the condensity reaches to more than 95%.
Then miscella enters into stripper in which residual solvent in oil will be removed,
the export temperature reaches to about 105°c and the general volatile of the
extracted crude oil is less than 0.30%.
*Desolventizing process
Wet meals discharged from the bottom of extractor enter the top of DTDC and
land on the predesolventizing trayers where thery are heated by the indirect steam,
thus, some solvent in meal is evaporated and meal temperature is risen.
Predesolventized meals land on predesolventizing trayers where they use the second
steam in desolventizing trayers to predesolventize solvent from meal, then meals enter
desolventizing layers in which direct steam is injected.
Direct steam is sprayed into the meals through the bottom holes, and distill the
solvent from meal by using steam in order to remove all solvent.
Desolventized meals land on the following drying and cooling layer to dry and cool meals,
cooled meals land on meal scraper blade from automatic material controlling gate on the
bottom of cooling layer, and then they are entered into meal storehouse.
*Condensation recovery process
Extractor is equipped with a separate condenser, first and second evaporation share
one condenser. Low and high temperature of solvent gas both from first and second
evaporation enter into the condenser after its neutralization, which greatly reduces
the load of condenser and improves the efficiency of condensing.
Stripping and analyzing share one condenser, the non-condensable gases from extractor
and other condensers enter into the vent gas recovery system through the final condenser.
In the recycling system, the cold paraffin will absorb the solvent gas and the final
nonsolvent gas will be discharged through fire resistance valve.
Paraffin absorbed the solvent gas can be also called rich oil, after heating by oil-oil heat
exchanger and steam, the rich oil will enter into desorber for desorption,
and into condenser after changing solvent into gas,
the final cooled paraffin can be recycled.
| Technical Parameters for cooking oil extractor machine |
| Steam consumption | 200kg/ton oil |
| Electric consumption | 28kwh/ton oil |
| Water(soften water) | 150kg/ton oil |
| Phosphoric acid | 2~3 kg/ ton oil |
| Alkali | acid valuex 1-3kg/ ton oil |
| Circulating water cooling water yield | 150m3/h |
| Bleaching earth consumption | 3-5kg/ ton oil |
| Waste bleaching earth oil content | ≤25~35% |
| Refining losses |
acid valuex 1.2 (chemical refining) acid valuex 0.6 (physics refining ) |
| Bleaching losses | the quantity of bleaching earth x 0.25% |
| Deodorization loss consumption | ≤0.5% |
| Refining rate | 1-refining consumption |
| Advantages for cooking oil extractor machine |
* Absorbing the world's leading core extraction technology, design and develop
a process which is efficient, economical and reliable. Adopting box-chained loop
type extractor can effectively achieve low residual oil, low solvent consumption
and low failure rate of equipment.
* Full automatic computer control system is adopted in extracting process,
adjust automatically and operate stably.
* Negative pressure technology is adopted in condensate system.
* Stainless steel heat exchange tubes and multistage baffling make the condenser
have a high heat transfer effciency, also the water consumption is low.
| Certificate |
If you are in the market for cooking oil extractor machine,
please contact with Joanna ^ 6^
Mobile: 0086 13526828605 ( welcome to add my whatsapp and viber )
Shandong Microwave Machinery Co.,Ltd.is a Pretreatment Processing Line factory specializing in the production of bottom price canton fair LD brand cooking oil extractor machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Pretreatment Processing Linecustomers with design and services of 1-2000 tons bottom price canton fair LD brand cooking oil extractor machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Pretreatment Processing Lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Pretreatment Processing Lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Pretreatment Processing Lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: sales10@ldfoodmachine.com
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)
Crispy Rice Food Processing Line
