English
See More
Peanut oil expeller machines extractors
Product DescriptionPeanut oil smells good, tastes favorable. We provide all machines necessary for a complete Peanut oil plant, including pre-treatment machines, press, solvent extractors, refinery machines, etc.
I. Pre-treatment
Peanuts contain about 25% shell and 3% skin. Before extracting oils and fats from Peanuts, the mill needs to prepare it by cleaning, crushing, softening, flaking and cooking. For cleaning , we offer magnetic separator, aspirator, or different size cleaning sieves, as shown below, to remove impurities from peanuts.
Next, every peanut is divided into 6 or 8 pieces by crushers, as shown below.
Then, the temperature and moisture of peanut pieces will be adjusted by conditioner or softening kettle so that they become soft and wet enough for flaking. This step improves their ductility. It is special for peanut oil seeds. Below is photo of softening kettle.
The flaking roll will make the wet soft peanut pieces into flakes. We have vertical flaking roll, multi-stage flaking roll, hydraulic flaking roll and spring flaking roll etc., as shown below.
Finally, the flakes will be cooked to make tiny oils and fats groups get together to become bigger, and to make them less adhesive, easier to get out of flakes.
II. Solvent extraction
Oils and fats in Peanut flakes can dissolve in certain solvent. Therefore, we can immerse pressed fakes in solvent to extract oils and fats. Then remove solvent from wet meal, strip solvent from miscella, and recycle solvent.
Extraction
Weâve percolation extractor, immersion extractor and rotocel extractor, etc., as shown below. The solvent pumps in extractor will continuously spray solvent and soak the peanut cakes in it, so that oils and fats can be dissolved. After that, you get wet meal and miscella (mixed oil and solvent).
Wet meal treatment
Desolventizer toaster with integrated LD-cooler(DTDC) is a system for separating solvent from the wet meal. We've vertical desolventizer toaster, horizontal desolventizer, flash desolventizing system and low temperature desolventizer, etc., as shown below.
Miscella treatment
After extraction, filter the miscella, send it to two evaporators successively, and then to the stripping tower. Weâve raising film evaporator, vapor separator, negative evaporator, normal evaporator, etc. For stripping, weâve tubular stripping column, disk stripping column, plate stripping tower, filling steam stripping tower, etc. After evaporation and stripping, you get crude peanut oil and desolventized meal. This meal can be used to produce feeds. The crude oil needs to be refined.
Solvent recovery
The solvent vapour from wet meal and miscella will be collected by condensers to be reused. Weâve pipe bundle condenser, spraying condenser, contact condenser, etc., as shown below.
III. Crude oil refining
Crude Peanut oil has a lot of impurities, such as phosphatide, free fatty acid, pigment, wax, sterol, sands, etc. We have to get rid of these impurities to get edible oil.
Degumming
There are many ways to move the mucilaginous impurities from crude oils and fats, for example, hydration, heating, adding acids, etc. Weâve hydration tank, acid refining mixer, etc., as shown below.
Deacidification
This step is to remove pigment from crude oil to adjust its color. You can adjust according to the requirement of your market. Weâve acid refining tank.
Deodorization
This step is to move unpleasant smell from crude oil. This is an important standard for refined oil. Weâve deodorizing tank.
Solvent Extractor Advantages
1) The material is divided into several independent units on the material bed, which can effectively prevent miscella at all levels from fleeing hither and thither on the material layer and ensure the concentration gradient between several sprays.
2) Immersion area appears in each lattice, which can help achieve better immersion effect.
3) The chain box is supported by track and can prolong the service life of screen deck by not touching it.
4) The towline extractor is driven by world leading double-shaft hydraulic motor, with balance force, reliable operation and less maintenance cost.
Certifications
Our Services
Whole set of equipment for palm oil production line.
Motor and power control system.
Installation material.
Installation and test-run.
Drawing of process description, equipment layout, foundation and construction.
Drawing of power control.
Isolation and painting of equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Company Information
Main business field
10-500T/H oil material primary cleaning,drying and storage section turn-key project.
100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
DTDC separated machine, the full negative pressure evaporation,
Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
30-1000T/D continuous physical (chemical) refining line.
20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
10-200T/D fatty acid esterification edible oil production line.
Contact
Crispy Rice Food Processing Line
