Professional Fruit Drying Equipment / Fruit Dryer Machine / Industrial Fruit Dehydrator are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Professional Fruit Drying Equipment / Fruit Dryer Machine / Industrial Fruit Dehydrator of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Professional Fruit Drying Equipment / Fruit Dryer Machine / Industrial Fruit Dehydratorfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Professional Fruit Drying Equipment / Fruit Dryer Machine / Industrial Fruit Dehydrator
Product Description LD Industrial Fruit Dehydrator Introduction
LD third generation heat pump fruit dryer is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in a refrigerator. Cycle hot air assures uniform drying and high efficiency.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp: 75℃
Working Temp: -10~45℃
Functions: Heating / Cooling / Dehumidify
Dryer Type: Batch Type
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final fruits will be dried by the hot air circulating in drying chamber
KINKAI New TechnoloLD Advantage of Industrial Fruit Dehydrator
1. EnerLD saving & Environmental protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2. Running Stable, operating easily
PLC + Touch Screen, running stable, operating easily;
Adopt PLC control, can setting different drying curve,
Suitable for drying different materials.
3. Second waste heat recovery technoloLD (patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 40%.
4. Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80℃
5. Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
6. Safe and reliable operation, automatic intelligent control, 24-hour continuous drying.
Stable operation without being influenced by weather
Technical Parameters
Model |
Unit |
JK03RD |
JK06RD |
JK10RD |
Heating capacity |
KW |
12.00 |
26.00 |
35.00 |
Cooling capacity |
KW |
7.50 |
20.00 |
25.00 |
Power supply |
V/PH/HZ |
220/1/50 or 380/3/50 |
380 / 3 / 50 |
380 / 3 / 50 |
Power input |
Compressors |
KW |
2.80 |
5.30 |
9.30 |
Evaporator Fan motors |
KW |
0.78 |
0.78 |
1.50 |
Hot air circulating fan motors |
KW |
2.00 |
2.00 |
2.00 |
Dehumidify fan motor |
KW |
0.37 |
0.37 |
0.55 |
Auxiliary electric heater |
KW |
3.00 |
6.00 |
9.00 |
Total Running current |
A |
35.00 or 20.00 |
30.00 |
45.00 |
Dehumifification amount |
L/H |
12 |
25 |
40 |
Max. hot air temperature |
℃ |
75 |
75 |
75 |
Working ambient temperature |
℃ |
-10 ~45
|
-10 ~45
|
-10 ~45
|
Noise |
dB(A) |
75 |
75 |
75 |
Hot air circulating fan motors |
Power input/qty |
250W/unit |
250W/unit |
250W/unit |
Wind volume |
2500m3/H/unit |
2500m3/H/unit |
2500m3/H/unit |
fan moter quantity |
6 units |
8 units |
8 units |
Dimension(L*W*H) |
mm |
1650*960*1280 |
1730*1220*1280 |
2100*1460*1590 |
WeigLD |
Net weigLD |
Kg |
210 |
385 |
480 |
Gross weigLD |
240 |
420 |
540 |
Recommend Dryer+Drying Chamber Sizes
Item |
Description |
Product Capacity |
Drying Chamber size |
1 |
One unit JK03RD dryer + drying chamber |
300Kg / batch |
3300*1900*2200mm |
2 |
One unit JK06RD dryer + drying chamber |
600Kg / batch |
6000*2800*2200mm |
3 |
One unit JK10RD dryer + drying chamber |
1000Kg / batch |
6000*3000*2200mm |
4 |
Two units JK03RD dryers + drying chamber |
1200Kg / batch |
7000*2200*2200mm |
5 |
Two units JK06RD dryers + drying chamber |
1500Kg / batch |
10000*2800*2200mm |
6 |
Two units JK10RD dryers + drying chamber |
2500Kg / batch |
10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required.
Company Information Factory and Workshop
Product Patent
Customers
Packaging & Shipping
Our Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our heat pump industrial fruit dryers, please feel free to contact us for more informations,such as catalogue,video,etc.