What is the main material of Biodiesel Oil Production Line?
NO. Raw material Note
1 Slaughterhouse scraps From slaughter house
2 swill cooking oil, swill Waste cooking oil
3 Fatty Acid & Acid Oil from plant refinery For example the bean & peanut etc.....
4 Animal bone, viscera fatty and so on......
The 30Ton physical method sunflower oil equipment is same,just processing and catalyst is different,Shandong Leader Machinery Co.,Ltd. engineer will training you as your raw material use.
What is the advantages of biodiesel?
Engine is starting at low temperature(-10C).
It not belongs to dangerous cargo,so it’s easy to transport.
There is less sulfur and aromatic alkyl in biodiesel,so it's less harmful to human and environment.As a kind of renewable energy sources,the biodiesel will not finised.
The supply of biodiesel is not controlled by OPEC,it’s benefit to the stability of international petroleum market.
30Ton physical method sunflower oil equipment
Company InformationBrief introduction of our company
Shandong LD Grain And Oil Machinery Co., Ltd. founded in 1976, with nearly 40 years of development and growth, has become a well-known grain and oil machinery manufacturing enterprises with import and export rights in home and overseas, in 2002 passed the ISO9001 quality management system certification, National Food Processing Equipment Engineering Technology Research Center, the National agro-processing technology and equipment research and development sub-centers and the provincial post-doctoral research base development platform.
Business Scope⦠1-5000T/H oil material first cleaning,drying and storage section turn-key project.
â¦10-5000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot ⦠peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
⦠Extraction workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
⦠20-3000T/D oil continuous grade two or one physical (chemical) refining production line.
⦠1-6000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
⦠1-3000T/D Fatty acid esterification production cooking oil production line.
FAQFAQ for sunflower oil equipment
Q1: How is the quality of your oil machine?
A1: Our oil machine are manufactured strictly according to national and international standard, and we take a test on every equipment before being delivered out. We have got CE certification and all kinds of testing report; if you want please just ask us for it.
Q2: What is the warranty for the oil machine?
A2: Our products have the high quality, we can offer 12 months warranty. The time for the warranty is much longer than any other similar products.
Q3: Can you manufacture the special products according to customers?
A3: Of course the answer is YES. You can contact with us directly.
Q4: How can costumers be sure they can get the products on time?
A4: If we can not deliver the products during the ordered time, we can give back 100% your money. The third part, SGS can also help you check the machine before the delivery.
Q5: Can engineer go to installing and trainig?
A5: The answer is YES YES YES .
Trading ProcessTrading process for sunflower oil equipment
Product Description
Process of sunflower oil equipment
Impurity of extracted crude oil must be removed in order to reduce losses and increase yield of corn germ oil in oil refining process. Crude oil filter can remove impurities, control impurity of extracted crude oil under 0.2%, thus improve degumming efficiency.
Degumming section for sunflower oil equipment
Degumming process is usually called dephosphorization because most of the colloidal impurites are phospholipid.There are four kinds of method to degum---- hydration degumming, adding acid degumming, heating method and adsorption method. The purpose of degumming is to get rid of the colloidal impurity in crude peanut oil. Intermittent process preheats crude oil to 80 ~ 85 â. The amount of water in crude oil bases on colloid content, and generally 3-4 times of the gum content, water temperature at 85 ~ 90 â (5 â higher than oil temperature). Finish water adding in 40-60min, along with 60-70r/min stirring, continue stirring 3-5min after adding water, and stand for precipitation 2-4h.
Deacidification section for sunflower oil equipment
The crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90â) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process.
Decolorization section for sunflower oil equipment
Heating degummed oil to 25 ~ 135 â, dehydrated into a vacuum dryer 20 ~ 30 min. Moisture of dehydrated oil is less than 0.1% (after degumming of crude oil via the oil contained in the 0.3% to 0.5 % of the water will affect the adsorption capacity of bleaching clay section). Degumming of oil can remove grease in oil pigment to improve oil color, adsorption of aflatoxin and trace metals, phospholipids, other gum and other impurities. It ensures high quality of peanut oil and improves oil stability.
Deodorization section for sunflower oil equipment
The qualified bleaching oil enters into the spiral plate heat exchanger to recover most of the heat, and next goes to high pressure steam heat exchanger to be heated to the process temperature (240-260â) and then enters the deodorization tower. The upper layer of combined deodorization tower is the packing structure which is mainly used to remove the odor producing components such as free fatty acid (FFA); the bottom layer is the plate tower which is mainly for achieving the hot bleaching effect and reducing the peroxide value of the oil to zero. Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80 and 85â through the cooler. Add the required antioxidant and flavor agent, and then cool the oil below 50â and store it. Such volatiles as FFA from the deodorizing system are separated by the packing catcher, and the separated liquid is FFA at low temperature (60 and 75â). When the liquid level in the temporary tank is too high, the oil will be sent to the FFA storage tank.
Dewaxing section for sunflower oil equipment
For sunflower oil, cotton seed oil, rice bran oil refining, dewaxing process is necessary in order to improve oil quality.
Our Services
Contact UsContact for sunflower oil equipment
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of 30Ton physical method sunflower oil equipment.Shandong Leader Machinery Co.,Ltd. manufacture 30Ton physical method sunflower oil equipment making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Biodiesel Oil Production Line for you reference,such as 30Ton physical method sunflower oil equipment ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Biodiesel Oil Production Line.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 30Ton physical method sunflower oil equipment, inform us raw material you want to use for 30Ton physical method sunflower oil equipment,and specific requirements for 30Ton physical method sunflower oil equipment.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Biodiesel Oil Production Line.
Shandong Leader Machinery Co.,Ltd. value "honesty, innovative and quality" because Shandong Leader Machinery Co.,Ltd. know that Shandong Leader Machinery Co.,Ltd. are not only supplying equipment to our clients but the partners to help our clients to get a better result.Keeping this in our mind,Shandong Leader Machinery Co.,Ltd. not only make high quality food processing equipment, but also help the clients to figure out the optimum processing work flows,make amendments according to client's specific needs,training staffs for the user of our equipment and even more, because Shandong Leader Machinery Co.,Ltd. believe that our users or clients' success is the foundation of ours.