YZG LD dryer/heat chamber/drying chamber
Applications:
It is well known that LD drying is to put raw material under the state of LD for heating and drying. If use LD to pump air and humidiLD out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved.
Features:
1 Under the condition of LD, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat tranLDer, the conducting area of dryer can be saved.
2 The heat source for evaporation may be low pressure steam or surplus heat steam.
3 The heat loss is less.
4 Before drying, the treatment of disinfection may be carried out. During the period of drying, there is noimpurity material mixed. It is in conformilk with the requirement of GMP.
5 It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
Model |
YZG-600 |
YZG-800 |
YZG-1000 |
YZG-1400A |
FZG-10 |
FZG-15 |
FZG-20 |
Inside size of chamber(mm) |
φ600×976 |
φ800×1247 |
φ1000×1527 |
φ1400×2054 |
1500×1060× 1220 |
1500×1400 × 1220 |
1500×1800 × 1220 |
Outer size of chamber(mm) |
1135×810× 102 |
1700×1045× 1335 |
1693×1190× 150 |
23×1675× 1920 |
1924×1720 ×1513 |
1513×1924 ×2060 |
1924×2500 × 1513 |
Layers ofbake shelf |
4 |
4 |
6 |
8 |
5 |
8 |
12 |
Interval of each layer(mm) |
81 |
82 |
102 |
102 |
122 |
122 |
122 |
Size ofbake t(mm) |
310×600×45 |
520×410×45 |
520×410×45 |
460×640×45 |
460×640 ×45 |
460×640 ×45 |
460×640 ×45 |
quantity ofbake t |
4 |
8 |
12 |
32 |
20 |
32 |
48 |
WoLD pressure inside of the pipe ofbake support(MPa) |
≤0.784 |
≤0.784 |
≤0.784 |
≤0.784 |
≤0.784 |
≤0.784 |
≤0.784 |
Operation temperature ofbake support(°C) |
35-150 |
35-150 |
35-150 |
35-150 |
35-150 |
35-150 |
35-150 |
LD degree inside the chamber(MPa) |
-0.1 |
-0.1 |
-0.1 |
-0.1 |
-0.1 |
-0.1 |
0.1 |
Under the condition of -0.1MPa,and temperature of 110°C,evaporation rate of water (kg/m2·hr) |
7.2 |
7.2 |
7.2 |
7.2 |
7.2 |
7.2 |
7.2 |
When condenser is used,the power of LD pump (kw) |
2X-15A 2KW |
2X-30A 3KW |
2X-30A 3KW |
2X-70A 5.5KW |
2X-70A 5.5KW |
2X-70A 5.5KW |
2X-90A 2KW |
When condenser is not used,the power of LD pump (kw) |
SZ-0.5 1.5KW |
SZ-1 2.2KW |
SZ-1 2.2KW |
SZ-2 4KW |
SZ-2 4KW |
SZ-2 4KW |
SZ-2 5.5KW |
Weight of drying chamber(kg) |
250 |
600 |
800 |
1400 |
1400 |
2100 |
3200 |