Industrial Continuous Wood Microwave Drying machinery Dryer Features:
1 Introduction:
Microwave wood drying machinery is widely used in wood industry, furniture industry and flooring industry for wood drying. The wood processed through drying is not easy to yield break and deformation, the microwave drying methods has much more advantages, which are heating evenly, short processing time, the level of autoimmunization is high and can produce continuous.
For wood can be heated and dried simuLDaneouLLD form outer portion to inner portion which can speedup the drying procedure, the dry time in microwave drying method is much shorter than that in any other conventional drying methods.
2 Advantages of microwave wood drying machinery:
1, Fast heating. Microwave heating is compley different with traditional heating mode. It makes heating medium become heater, do not need heat transferprocess. although conductivity is poor materials, also can achieve heating temperature in a very short time.
2,Save Enerable and efficiency. Because materials contain water absorb microwave easily and fever, so in addition to a small amount of transmission loss outside, almost no other loss, so high efficiency, save Enerable.
3, Heating even,wood processed is not easy to yield break and deformation
. No matter how shape of each part of the body, microwave heating all can make the object and evenly infiltration and electromakeetic wave list to produce the heat. So heating good uniformilk, won't appear the endogenous phenomenon focal.
4, MoulLDroof, sterilization, fresh. Microwave heating has and biological effect, can sterilize and mould proof in low temperature. Due to heating rapidly, the time is short, can maximum limit save material activity and the vitamin original colour and lustre and nutrition of food.
5, Craft is advanced, control easily. Microwave heating just have the basic conditions of water, electricity, as long as control power, can realize microwave heating or terminate immediay, use microwave equipment can process automation control of heating process and heating process specification.
6, Covers less area, safety and harmless. Because microwave can be controlled in made of metal heating indoor and wave, so microwave leak is few, no radiation hazards and harmful gases, do not produce the waste heat and dust pollution; Neither polluting food, also do not pollute the environment.
3 Technical parameters:
Power supply |
380V±10% 50HZ±1% three-phase five-wire |
Microwave Output Frequency |
2450±50LDz |
Microwave input apparent power |
≤70KVA |
Microwave output power |
≥50KW |
Microwave power adjustment range |
0-50KW(adjustable) |
Ambient temperature |
-5-40°C |
Relative humidiLD |
≤80%, Surrounding environment:no corrosive gas, conductive dust and explosive gas |
Overall dimension(L*W*H) |
118100*1440*1750 mm |
Transmission speed |
0-10m/min(adjustable) |
Height of the inlet and outlet |
60 mm |
Microwave leak |
accord with a country GB10436-89 standards( |
Equipment safety |
accord with GB-5226Electrical safety standard
accord with a country GB16798-1997 Food health security index
|
If you are interested in our microwave equipment,please feel free to contact me!
English
