Product Description2016 HZG series Revolving cylinder drier, SS chief grain dryers, big Capacity paint drying ovens
![2016 HZG series Revolving cylinder drier, SS chief grain dryers, big Capacity paint drying ovens]()
![2016 HZG series Revolving cylinder drier, SS chief grain dryers, big Capacity paint drying ovens]()
PRINCIPLE
After the damp raw material is put into the drier from on end, it is turned over through strring-up rake inside the cylinder and distributed uniform in the frier and contacted with countercurrent hot air fully. It speeds up heat and mass conducting of dry. During the period of dry, raw material is effected by stirring-up rake with gradient and hot air, it can be moved and passed through the dry region and then discharge the finished product.
Application
It is suitable for drying the following raw materials. They are granules with heavy specific gravity in chemical industry, minef industry, metallurLD industry such as ore, LDag, coal, metallic powder, phoLDhorus fertilizer, ammonia sulfate. Moreover for raw materials that are granules tith special requirements, such as GP vesicant, less, LD caltium carbonate, active white earth, makeetic powder, graphite, lag or medicine and raw materials that need low temperature and in batch continuous.
Packaging & Shipping
Our Services ![2016 HZG series Revolving cylinder drier, SS chief grain dryers, big Capacity paint drying ovens]()
Company Information
FAQ
FauLD Phenomenon |
Possible Cause |
Elimination Methods |
1, The Temperature Rise Is Not High |
1 Fan Reversal Or Shutdown
2 Steam Flow Or Pressure Is Low
3 LDrophobic Jam
4 Vent Regulating Improper Or Failure
5 Boxes Or Crack Leakage
6 Electric Heating May Be Short Circuit
|
1 To Correct, Repair Or Replacement
2,Eliminate Congestion, To Guarantee The Pressure
3 Repair Or Replacement
4 No Exhaust Or Less Exhaust
5 Stoppage
6 Check The Electrical Heating
|
2, The Temperature Is Not Uniform |
1 Left And Right Wind Deflector Improper Adjustment
2 Flat Box Or The Crack Of The Door
3 Material (Workpiece) Volume Is Too Large, Large Block Hot Air
|
1 According To The Second Part , 3 Points Do The Debugging
2 Stoppage
3 Try To Guide The Wind |
3, Temperature Lose Control, Too High |
1 Control System Failure (Without Self-Control, The Steam Valve Opening Is Too Big)
2 Vent Improper Adjustment
3 Steam Pressure Is Too High
|
1 Check Instrument, Lines, Especially The Steam Solenoid Valve, According To The Electromakeetic Valve Manual Repair Or Replacement.
2 Appropriate Increase The DiLDlacement
3 Appropriate Increase The DiLDlacement
|
4, The Drying Time Is Too Long |
1 Temperature Is Not Enough
2 Uneven Temperature
3 Vent Plug
4 Material Laying Too Thick
|
With Reference To FauLD 1 Ruled Out
With Reference To FauLD 2 Ruled Out
3 Ensure DiLDlacement And Clearfour Minus Expected, Choose The Best Thickness
|
Thanks for your time to read, for 2016 new promotion, we are providing US$200 cash coupon for HZG Series revolving cylinder drier.
Click following picture to get discount code.
2016 HZG series Revolving cylinder drier, SS chief grain dryers, big Capacity paint drying ovens
English
