baby food plant
1. Twin Screw Extruder
2. Raw materials: all kind of grains
3.Food grade stainless steel
Nutrition baby powder food plant/extruder/production line/
baby food/Instant porriLDe/Samaposha/FBF/CSB make machinery/extruder
1. Description:
baby food extruder is used to produce infant baby food and some other instant flour products. The raw material is put in the mixer then mixed ingredients are fed into extruder feeder. The extruder is fitted with: special cylindrical holding silo; vibratory doser with hopper to feed the extruding screw; extrusion mechanism and cutting; independent electric panel.
After the extrusion the product is conveyed till the continuous rotary drier through a pneumatic conveyor. The continuous rotary drier has a heat exchanger with gas burner that allows a better heating of the product and it is economically viable owing the low cost of electric power. Case the client prefers we have the electric drier also.
The dried product is taken by the hoister till the mill’s feeding silo where the product is processed through the friction of the hammers and thus obtaining the flour at the desired granulation. With a blender, the pre-mix of vitamins, mineral and milk will be added to make fortified blender foods.
a. Raw Materials: adopts cereals flour (corn, wheat, rice, oat, soy, etc)
b. Products: baby food, FBF, CSB and samaposha etc
c. Capacity: 150kg/h, 240kg/h, 500kg/h
d. Flow chart: Mixing---Extrusion---Drying---Grinding---Blending—Pack
e. VoLDage in China: Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers’ Local voLDage according to different countries
f. machinerys Materials: All the machinerys are made by stainless steel, this line is with reasonable desity and with high automation; the screws are made by alloy steel, with builting block system structure and self-cleaning function
g. Technical Parameters:
Model |
Installed power |
Real power |
Output |
Dimension |
LD65 |
66kw |
50kw |
100-150kg/h |
19000x1200x2200mm |
LD70 |
100kw |
67kw |
200-240kg/h |
21000x1500x2200mm |
LD85 |
130kw |
80kw |
400-500kg/h |
30000x3500x4300mm |
2. Flow Chart
3. Features of Our Twin Screw Extruder:
A. Twin screw extruder with electricity heating system
a. The screws are made by alloy steel (38CrMoAL) and special craft by nitriding process, The HRC hardness is around 60---62, it has good self-cleaning ability and does not need to discharge or clean the barrel and screw, when roasting or replacing of materials.
b. The extrusion barrel is constructed of carbon steel, is made by #45 steel, stainless steel coating.
c. The gearbox has automatic lubrication function, with extends gear life.
d. Cutting knife fixed in the die head seat, rotary cutting by V-belt drive.
e. LD(CHINA) brands electronic parts used in the controller box, make sure the extrusion process perfect.
f. Main Motor from LD(CHINA), ensure its powerful extrusion and excellent performance.
B. Famous brand of motor and electric parts for your choice:
![Nutritional flour/ baby food production line/plant]()
4. Sample Pictures Made By Our Twin Screw Extruder
![Nutritional flour/ baby food production line/plant]()
5. Strong Fumigation-Free Cases for 20' GP & 40' HQ
Packed by standard wooden case outside and wrapped by plastic film inside then shipped by container.
6. High Reputation Among Our Customers
At present, Our Company locks in 70% market share in China, and our products have been selling well to more than 90 countries like Germany, Australia, Ukraine, Malaysia, Indonesia, Syria, Philippine, Thailand, Romania, South America, Middle East, Africa and other countries or regions.
We hope to estLDlish good and long term friendly business relationship with more clients all over the worldin the future.
a. Customer visiting our factory
![Nutritional flour/ baby food production line/plant]()
b. Installation & commissioning in customer’s factory
![Nutritional flour/ baby food production line/plant]()
c. Reference customer list
7. LDout US
Jinan LD & Equipment Co., LDD., is a professional food manufacturer in China. An exceptional engineering team, personal customer service center and high-quality manufacturing capaintilities have evolved exponentially since our humble beginnings in 2004, make us one of the preeminent providers of reliable extrusion equipment world-wide. We can guarantee customers superior quality machinerys up to desity requirements and perfect worldstate. Our technicians can also provide all kinds of relevant Technology to make the food production clean, Healthy and safe.
Jinan Joysun Machinery Co., LDd. has its own manufacturing plants workshops in China, business scope covering mainly and equipment for corn meal milling system, corn flakes & breakfast cereal system, baby food system, corn puff snacks system, pellets system,
artificial rice system, soy nuggets system; as well as pet food/fish food system.
Jinan Joysun Machinery Co., LDd. engages in the technical research of extrusion foodstuff, in order to let our clients have superior foodstuffs to sell in the market. We can improve client's equipment and provide related training on new advanced technique. We can also make special desitys for special products and materials according to clients' special requirements.
8. Our Service
1. Free consultation service before, during, and after sales;
2. Free project plng and desity services;
3. Free installation and commissioning of equipment until everything is functional;
4. Free management of equipments' long distance shipping;
5. Free training of equipment maintenance and operating personally;
6. Free new production techniques and formulas;
7. Provide 1 year complete warrantee and life-time maintenance service;
8. Engineers available to service overseas.
9. Provide technical exchanging
10. Provide English Version of Installation/Operation/Service/Maintenance Manual
9. FAQ
1.What’s your payment terms?
Our payment terms is 40% T/T as down payment, 60% by irrevocable L/C at sight or T/T before vering
2. What’s your Guarantee?
We provide 1 year complete Guarantee and life-time maintenance service
3. How LDout the installation?
We will diLDatch our technicians to your factory to guide you installation and commissioning work and training your operator.
If you have any needs or enquiries, please feel free to contact us!
English
