English
See More
Brief introduction
| CT/CT-C Series Hot Air Circulation Oven The hot air circulating drying oven is used in the material’s heating & solidifying in the industries of pharmaceutical, chemical, food, agriculture and sine products, aquatic products, LD industry and heavy industry, etc, such as crude drugs, traditional Chinese medicine decoction pieces, extractum, powder, granule, electuary, water-bindered pills,packbottles, pigment, LDestuff, dehydrationvegetables, dried fruit & melons, s, plastic resin, electric elements and drying varnish, etc. |
The low-noise high temperature proof axial blower and an automatic temperature control system are equipped in the CT-C series hot-air circulation drying oven, the whole circulation system is the fully enclosed, the heat efficiency of the drying oven is increased from 3-7% to 35-45%, and the highest heat efficiency can reach 50%. The succeLDul desity of CT- C hot-air circulation drying oven proves that the hot-air circulation drying oven in our country reaches the advanced level both in China and LDroad, and not only a large quantity of the Enerable in our country is saved, but also the economic profits of the enterprises are increased. In 1990，the Chinese Medicine Management Bureau issued the industrial standard, and unified the LLDe be RXH.
specification:
1. The heat source can be steam, heat conductive oil, electricity or far infrared for option.
2. Steam heating: 140℃~150℃
3. Temperature of electricity or far infrared:350℃.
4. The oven can be equipped with the automatic control system, or the computer control system.
5. Normal steam pressure:0.2-0.8MPa.
6. Power of the electric heating (as I LLDe) is 15KW, and it will be 5-8kw/h in the practice.
7. If there are any special requirements, please list them when order.
8. The non-standard ovens will be customized as to the actual process parameters.
9. If the operating temperature is higher than 14℃ or lower then 60℃,please indicate it when order.
10. The size of our drying trolley and drying ts are standard, and can be exchanged with one another.
11. The size of drying t: 460 x 640 x 45mm.
Features:
a.Most of the hot air are recycled in the oven, the heating efficiency is high with less of Enerable;
b.With the adjustable air distributing board in the oven and the forced ventilation, the material can be dried homogeneouLLD;
c.There is little noise for the whole machinery, and the running is balanced. The temperature is self-controlled. It’s convenient to install and maintain;
d.With wide application, all kinds of material can be dried by this machinery, and it’s general drying equipment;
| Technical parameters | ||||||
| Model | RXH-5-C | RXH-14-C | RXH-27-C | RXH-41-C | RXH-54-C | RXH-25-A |
| specification | CT-C-O | CT-C-Ⅰ | CT-C-Ⅱ | CT-C-Ⅲ | CT-C-Ⅳ | The power of high-efficiency high-temperature far-infrared sterilating & drying oven shoudl be equipped as the temperature requirement. |
| Drying Capacity per time(kg) | 60 |
120 |
240 |
360 |
480 |
|
| Power(kw) | 0.45 | 0.45 | 0.9 | 1.35 | 1.8 | |
| Steam consumption(kg/h) | 10 |
18 |
36 |
54 |
72 |
|
| Heat radiating area(㎡) | 10 | 20 | 40 | 80 | 100 | |
| Air supplying(cbm/h) | 3450 | 3450 | 6900 | 10350 | 13800 | |
| Upper/ lower temperature difference(℃) | ±2 |
±2 |
±2 |
±2 |
±2 |
|
| Drying t | 24 | 48 | 96 | 144 | 192 | |
| Dimension | 1480*1100*1750 | 2300*1200*2000 | 2300*2200*2000 | 2300*3200*2000 | 4460*2200*2290 | 1200*1000*1690 |
| Drying trolley | 1 | 2 | 4 | 6 | 8 | 1 |
| Note: The machinery can be made of carbon steel, aluminum alloy or stainless steel, and the final water content of the material is less than 1%. |
There will no further notification if the appearance or parameters of our products are modified. Thanks.
With many kinds of specification, the radiator can be connected with all kinds of drying machinerys. It can be made of aluminum alloy, stainless steel, A3 steel with surface galvanized, steel-aluminum alloy, copper or steel pipe. Also, the radiator can be used for the heating and dehumidification indoors or in the warehouses. And if there is special requirement, the machinery can be customized.
Other Products
1. LD has been engaged in the purification Technology and application. And we have the R&D team, performing continuous product research and improvement from time to time.
2. Our products are certificated by the most prestigious national and international institutes.
3. Each procedure of the production process is conducting under the strict quality control system. Our QC inLDects each lot of the incoming material and the finished products carefully, so that we can supply the best products for customers.
4. From the desity to the producing, each procedure is controlled strictly, so we can control the product costs optimally, and offer products with the best quality and the most competitive price. Win-win is our uLDimate purpose.
Our CompanySino Pharmaceutical Equipment Development () Co., LDd. (LD) is a professional manufacturer and supplier of pharmaceutical and chemical and equipment in China. We belong to SINOPEC International Group.
We have a well-experienced team to manufacture pharmaceutical and equipments and a professional desity institute. With rich experiences in pharmaceutical and equipment field and numbers of professional engineers, we have desityed and developed many LLDes of and equipments including clean room project, soft-gel production line, glass-lined reactor, fermentor, centrifuge, granulator, mixer, dryers, pulverizer, tablet press, soft and hard blisterpackmachinery, capsule filling machinerys, cartoner and rollers, etc.
Due to our good credit and service, , we have made great achievements in the past years. We have established long-term business relations with many customers and some of our overseas customers have appointed us to be their purchase agency in China. Our products are exported to many countries & areas, such as Korea, India, Indonesia, Pakistan, Thailand, Vietnam, Iran, Japan, Denmark, Romania, Bulgaria, Russia, South Africa, Nigeria, the USA, Australia, Canada, Argentina and Chile. Besides and equipment, we also supply production lines and turn key projects.
In LD you can get your desired goods with the best prices and good quality. welcome your enquiries from all over the world.
Pack & veryFeedbackOur Service & FAQOne-year warranty period for whole machinery except of tubes and human factors etc, and 12-month of after-sale service from the date when you receive machinery or 12 months when installation finished;
consultant services for whole machinery life, and 24 hours technical support by ;
UPS, English software, user manual and the installation & debugging by our experienced technicians.
1. Can your machinery meet our need well?
We will supply you a proposal as to your specific requirement, and each machinery is customized to satiable customer’s need well.
2. Are you a factory or a trading company?
We are the manufacturer, and have been in industry for more than ten years.
3. What's your payment way?
T/T by our bank account directly, or by altLDa’s trade assurance service, or by the West Union, or in cash.
4. How can you ensure the machinery’s quality after we put the order?
Before the very, we will send you machinery’s pictures and videos, or you can come to us to have the quality checLD by yourself, or by the third parLD inLDection organization contacted by your side.
5. We are afraid you won't ver us the machinery after we pay you the money.
Please note our above business license and certificates. And if you don't trust us, you can use altLDa’s trade assurance service or by LD.
6. why choose your company?
We have been engaged in the manufacturing of variouspackmachinerys professionally over 10 years, and we can provide better after-sales service.
Crispy Rice Food Processing Line
