English
See More
Seed Hydraulic Press Machine operating principle:
1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under hightemperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.
More than 30 years including 5 years overseas market experience of designing and installing complete Seed Hydraulic Press Machine,Shandong Leader Machinery Co.,Ltd. are now a leading company in Palm Kernel From Malaysia field.
Shandong Leader Machinery Co.,Ltd. supply various Seed Hydraulic Press Machine and connected equipments :
(1) High oil yield,obvious economic benefit .
(2) Lower residual oil rate in the dry meal .
(3) Improving the quality of the meal .
(4) Low processing cost , high productivity.
(5) Saving energy,saving labor.
Product Description
Sterilizing Station Of Palm Kernel Cake From Malaysia
The sterilizing tank uses direct steam to process, which can reduce activity of the enzyme, prevent the rancidity, ensure the good quality of the crude oil. At the same time, it is good for the trashing process. Our company have vertical sterilizing and horizontal sterilizing tank.
Threshing Station Of Palm Kernel Cake From Malaysia
Fresh palm fruits separate from bunches by thresher rotary drum rotating. Palm fruits are conveyed to digesting tank by elevator.Empty bunches are conveyed out of factory by scraper conveyor. Thresher shaft uses once forging technology. The equipment is stronger and has longer life. At the same time , our company developes non-shaft thresher drived by chain. in this way, it reduces power loss and saves production cost.
Digestor&Pressing Of Palm Kernel Cake From Malaysia
The palm fruit oil yield increases by adjusting material moisture and temperature in digesting tank. Digesting tank uses liquid level control, so material can distribute automatically and equipment runs fully automatically. Pressing machine uses hydraulic control system to adjust spacing between pressing bolts. So it can be suitable for various palm fruit species and guarantee the oil yield.
Palm oil refinery&fractionation Of Palm Kernel Cake From Malaysia
Physical refining technology is suitable to the advanced combined deacidification deodorization tower, a high degree of automation, low production cost, low loss, designed the dewaxing degreasing process, product quality can reach the national standard.
Palm oil fractionation technology developed by Jinan Beiside company is with advanced technology, full computer control system and low cost of investment. It is also with high liquid oil yield, high purity solid fat, high economic benefit, and other advantages etc.
Main business filed:
1.10-500T/H oil material first cleaning,drying and storage section turn-key project.
2.100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
3.Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
4.30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
5.20-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
6.10-200T/D Fatty acid esterification production cooking oil production line.
7.30-300T/D Palm oil extraction turn-key project.
Company Information
Shandong LD Grain&Oil Machine Co.,Ltd has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.
Certifications
Our Services Pre-sale |
System evaluation: 1. Project basic situaction Solution: 1. The investment budget 2. Site measurement 3. Technical discussion Product selection: 1.Factory inspection 2. Site measurement 3. Technical discussion 4. Supply professional drawing and lists Win-win cooperation: 1. Sign the contract 2. Wstablish mutual benefit, strategic cooperative partnership. |
In-sale |
Design evaluation: 1. Detailed technical assessment, arrangement 2. Design of process and equipment layout Procurement: Strictly inspection, optimized selection. Installation: 1. Quality and quantity guaranteed 2. Completion of hand over Acceptance: 1. Acceptance test 2. Accepted deliverables Technical traning: 1.On-site installation and products training 2. Operation skills training 3.Maintenance training 4. Centralized technical training |
After-sale |
Technical service: Long time technical service Accessories supplying: Supplying spare parts with cost Complaint handling: 12-24 hours response mechanism Client Review: 1. Call-back 2. Regular return visit. |
If you are interested in our products, please kindly send me your inquiry details in the Below , Click "Send" Now!
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Palm Kernel From Malaysia.Shandong Leader Machinery Co.,Ltd. manufacture Palm Kernel From Malaysia making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Seed Hydraulic Press Machine for you reference,such as Palm Kernel From Malaysia ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Seed Hydraulic Press Machine.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Palm Kernel From Malaysia, inform us raw material you want to use for Palm Kernel From Malaysia,and specific requirements for Palm Kernel From Malaysia.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Seed Hydraulic Press Machine.
Crispy Rice Food Processing Line
