English
See More
Shandong Leader Machinery Co.,ltd. the crude oil is output by the oil feed pump from the oil tank, and cottonseed oil manufacturing process next enters the crude oil heat exchanger to recover part of heat cottonseed oil manufacturing process after metering and then is heated to the required temperature by the heater. After that,cottonseed oil manufacturing process is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and High quality Cotton Seed Crusher then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and High quality Cotton Seed Crusher the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process. cottonseed oil manufacturing process there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture
High quality Cotton Seed Crusher
Company information
XinxiangJinxin Chemical engineering equipment co,. Ltd is mainly focused on all kinds of pressure vessel and machine manufacturing .It is established in 1978 and has much rich experience in this field . .And our best seller is peanut oil machinery .We produce the complete oil production line ,and sell to all the world ,such America , Middle east ,Africa ,Europe etc. 
Generally making oil process are as follows:
1) The first stage is clear, then the shell,cooking,press and extraction process.Through cleaning can reduce the loss of oil, improve the yield efficiency, improve the quality of oil and cake, and increased the capacity of equipment, reduce the mechanical wear and tear, avoid accidents, reduce the fly ash, that is conducive to environmental protection.
(2) Softening is broken for larger particles, or through controlling small particles of oil material degree of moisture and temperature making the oil material has the appropriate plasticity, facilitate flaking and steaming and cooking, the cooking average temperature is between 60 to 70 degrees Celsius.Flaking is conducive to the destruction of the fuel cell structure, easy to take out the oil from the cell. 
(3)The extraction is the process that oil by solvent from plants seed .Extraction is that making the solvent molecules penetrate into fuel oil form mixture (mixture) of a solution, then making mix the oil with solid residues (cake) separation,recycling the solvent the using the boiling point of different oil for evaporation. Finally the refining oil flue from the stripping tower. 
RefiningDeacidification Sodium hydroxide antagonize free fatty acids, and subside phospholipids, to remove the insoluble impurities, the after the separation of soapstock, neutral oil was washed in soft water, last drying in vacuum. Decoloration oil pigments in two categories: one is the natural pigment, such as the carotenoids lutein materials such as chlorophyll, these are easy to bleach, and the other type of the products of organic matter, these pigments are not easy to be bleached. Dewaxing can ensure the colour of oil to be clear bright at room temperature and frozen temperature to reduce the oil in the wax content to 10 parts per million to get crystal clear oil. Deodorization Using high temperature and high vacuum steam stripping method deodorization temperature commonly 180, vacuum degree 9.3 104 Pa can achieve ideal results.
Packaging & ShippingPacked by the protect film inner, water-repellent plastic outside. The wood packing is necessary if send by less than a container. Cold press castor oil machine will fixed by steel rope in the container. Make sure it is in good condition when arrived destination.Besides,if you have the special request,we will try our best to meet your needs.
By the way,our transport is the sea transportation, if you want to transfer the transportation to the railway or other transportation,please let me know before making contract.
Our delivery time is 30-70 days when we receive the prepayment or LC at sight.
Shandong Leader Machinery Co.,ltd. there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, cottonseed oil manufacturing process add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. High quality Cotton Seed Crusher To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and High quality Cotton Seed Crusher then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, cottonseed oil manufacturing process and the waste water is discharged to the sewage treatment station.and then Shandong Leader Machinery Co.,ltd. the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:sales21@ldfoodmachine.com
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.
Crispy Rice Food Processing Line
