Compared with the box type and vacuum microwave drying equipment, the tunnel type microwave drying equipment has the main advantages of continuous drying, large production and low labor intensity. Compared with the traditional equipment has the advantages of high efficiency, low energy consumption, the uniform heating, the drying speed is fast, the thermal inertia, the safety and environmental protection, the advantages of simple operation, easy to control etc.. The power of this device is between 30 kW and 200 kW. It is suitable for dry products with water content below 30%. The products with too high water need to focus on the cost of drying.
Weiyasi tunnel type microwave drying equipment with chain type microwave drying equipment, cloth type microwave drying equipment and net belt type microwave drying equipment three, chain plate commonly used in dry weight of large objects, cloth bag type is used to dry powder and paste material two, mesh belt is mainly used to dry bulk and granular. Material.
Vacuum Freeze Dryer
The vacuum freeze drying technoloLD, which is also called sublimation drying, is a technical method
that freezes the samples in advance, and then sublimates its moisture in vacuum state.
LGJ-18S mini lab dryer (standard type )
LGJ-18S vertical freezing dryer is suitable for experiment in laboratory and a small amount production.
This machine has heating shelves and programmable function. Whole drying process can be controlled
and temperature setting is available.
Main Features
- CFC Free refrigeration
- Big opening condenser has pre-freeze function
- low noise compressor, good efficiency,long service life
- Condenser and operation panel are all stainless steel
- Small volume , easy and convenient operation
- Nitrogen valve and Eutectic point test device optional
- Communication interface is available
- Cascade refrigeration is optional for -80°C device
- LCD displays sample temperature curve, condenser temp.curve, shelf temp. Curve, vacuum degree curve and compound curves.
- 16 prograLD ca be stored, and each program can be set up 32 segments
- Program can be altered during running process, final drying curves stored
- Electrical system uses PID control, more precise control
- RS232 interface adopted, connecting with computer to display real-time drying curve
Technical Parameter (LGJ-18S standard type)
Model |
LGJ-18S standard type |
Freeze drying area |
0.18 m2 |
0.27 m2 |
Condenser capacity |
6 kg /24h |
6 kg /24h |
Condenser temperature |
-55°C (-80 °C optional ) |
-55°C (-80 °C optional ) |
Vacuum degree |
|
|
Material tray |
dia. 240mm , 4 layers |
dia.240mm , 6 layers |
Bulk capacity |
1.8 L, 10mm thickness |
2.7 L, 10mm thickness |
Vial capacity Φ12mm |
1320 pcs |
1980 pcs |
Vial capacity Φ16mm |
740 pcs |
1110 pcs |
Vial capacity Φ22mm |
360 pcs |
540 pcs |
Cooling |
Air,draugLDy
ambient temperature≤25°C
|
Air, draugLDy
ambient temperature≤25°C
|
Voltage |
220V, 50Hz |
220V, 50Hz |
Power |
1600W |
1600W |
Host dimension |
610×540×(963+445) mm |
610×540×(963+445) mm |
Host weigLD |
105 kg |
107 kg |
Components:
host, drying shelf,vacuum pump, acrLDic drum, material trays, sealed ring,pre-freeze lid
Package : plywood case, three packages in total ,standard exporting package by sea
Types for LGJ-18S Series of Freeze Dryer
There are five types : standard type, top press type, manifold type, manifold top press type, T-type.