English
See More
Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price
Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.
Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine with high quality, high performance and the best prices.
Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.
LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine
Shandong LD Grain and Oil Co,Ltd is already 30+ years old. It not only manufacture machines in Grain and Oil making, also includes the deep processing for corn and field crop.
FEATURES:
1. Fully enclosed, duplex structure design, electrostatic spraying surface, bright color, elegant design, and luxurious appearance;
2. Automatic pressure control can be controlled individually or remotely. flexible feed, convenient controlled by computer, high degree of automation;
3. In addition to pneumatic clutch, electromagnetic clutch can also be applied. Small size, low cost, easy to install, reliable performance;
4. The grinding roller is eccentric structure, can supported on the frame alone. It constitutes an independent self sustaining institution and good shock absorption;
5. Flat grinding roller set, the material is easy to enter the grinding chamber, efficiency, disassembly and maintenance convenience;
6. Synchronous rotation roller, powerful transmission, no jump gear, not deviation, smooths operation, low noise, safety and environmental protection;
7. The central of the machine with negative pressure suction device can improve feeding status, lower roller and the temperature of the material;
8. End products of grits, flour with uniform particle size, excellent quality, and large output.
FUNCTIONAL DESCRIPTION:
With breaking, cutting, peeling, scraping of the material, the effect of grinding is achieved.
This machine is suitable for large, medium size corn grain plants, wheat cogeneration equipment, can also use independently.
The series of milling machine are the main facilities of the flour mill, used for wheat, corn and coarse grain process.
It depends on one pair of opposite differential rotation to peel materials, extracting the endosperm from the food surface and milling it into flour.
TECHNICAL PARAMETER:
Type |
Capacity(t/h) |
Fast roll speed (r/min) |
Fast roller and slow roller speed ratio |
Feeding roller speed ratio |
Power (kw) |
Weight (kg) |
Size (mm) |
|
Corn grits |
Corn flour |
|||||||
Qr125/25 |
2.5-3 |
0.45-0.5 |
450-600 |
1.25:1 1.5:1 2:1 2.5:1 |
2:01 1.4:1 1:1 |
30-5.5 |
4100 |
2072x1490x1925 |
Qr100/25 |
2-2.5 |
0.35-0.4 |
450-600 |
3360 |
1822x1490x1925 |
|||
Qr80/25 |
1.5-2 |
0.25-0.3 |
450-600 |
3000 |
1622x1490x1925 |
|||
Qr125/30 |
3-3.5 |
0.55-0.6 |
450-600 |
45-7.5 |
5000 |
2072x1690x1925 |
||
Qr100/30 |
2.5-3 |
0.45-0.5 |
450-600 |
3800 |
1822x1690x1925 |
|||
We can supply:
The whole set of equipments for low fat corm degerming, germ extraction, the capacity can be 5t~1000t/d;
The whole set of equipments for various flours, capacity among 5~500t/d;
The whole set of equipments for garlic powder, capacity among 5~100t/d.
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine.Shandong Leader Machinery Co.,Ltd. manufacture LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine, inform us raw material you want to use for LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine,and specific requirements for LD 2013 advanced competitive price flour milling machines with price/10 ton per day wheat flour milling machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.
Crispy Rice Food Processing Line
