English
See More
10TPD-500TPD soybean oil processing plant cost from Shandong Microwave Machinery Co.,Ltd.
Main Application of 10TPD-500TPD soybean oil processing plant cost:
This processing line of 10TPD-500TPD soybean oil processing plant cost is mainly used for pretreatment processing for sea cucumber and similar seafood products;
Capacity of 10TPD-500TPD soybean oil processing plant cost: from 500-1000kg/hr for fresh materials;
Washing damage ratio: Main processing flow of Pretreatment Processing Line from Shandong Microwave Machinery Co.,Ltd. :
The processing of Pretreatment Processing Line have the complete processing flows for gutting, soaking, washing, blanching/cooking, cooling
and dewatering. This processing line of 10TPD-500TPD soybean oil processing plant costcan follow with vacuum freeze drying, hot air dehydration and other
processes to make FD or AD sea cucumber value added products.
1) Food processing technology consultency;
2) Working flow of Pretreatment Processing Line layout design;
3) Plant layout for processing line equipments;
4) Onsite guide of installation and commissioning;
5) Pretreatment Processing Line Training for local operators;
6) 10TPD-500TPD soybean oil processing plant cost After sales technical support.
10TPD-500TPD soybean oil processing plant cost
soybean oil processing plant cost
Product Description1, soybean oil processing plant introduction
What kind of palm oil refinery plant we can supply ?
1. Batch type palm oil refinery plant: 1-30tons per 24hrs.
2. Semi-continuous type crude oil refinery: 20-50tons per 24hrs.
3. Continuous type crude oil refinery: 30-600tons per 24hrs.
What kind of crude vegetable oil can be refine?
Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil) ,peanut oil,
sesame oil, conttonseeds oil etc.
2, soybean oil processing plant main procedures
Hydration Deguming & Alkali Refining Deacidification
The crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat
exchanger to recover part of heat after metering and then is heated to the required temperature
by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from
phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make
the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend
on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90℃)
suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil.
Then the oil goes to the washing process.
Bleaching
In normal situation , there is pigment in the crude oil , we need to using the active clay to absorb the
pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away . If you want
to get light color oil , you need to add more active clay . That is mean , the customer can accord to his
requirement to control the oil color. This process is carried out under the vacuum condition.
Deodorization
Usually ,there are some odors in the crude oil , it affects the quality of the edible oil . About our
refining process , we usually use the direct steam to take odors away in the vacuum condition .
General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot,
thetemperature is very high , it also can finish the dehydration section.
Filtering
This process can remove off the small amount of unsettle gum soluble impurities in the degummed
oil, after oil dehydrate cooling (60 °C), filtering again, to ensure the product oil quality. Then pumping
the final oil into the oil tank.
Automatic control
3, soybean oil processing plant functions of main parts
(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Deodorizing section: to remove off the odor components in oil.
(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature reach
above 280C.
(6) Steam generator: produce the needing steam for de-odoring and distillation.
(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree
can reach above 755mm Hg.
(8) Press filter: filter clay, filter out clear oil.
(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
Company Information
Our Strength
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global grain and oil
industry.
2, We have deep cooperation with Henan Machine Design Research Institute and Henan University of
Technology. Our professor often go abroad attending grain and oil conference and forum.
3, We have completed service line including technical department, engineering department, project department,
electronic commerce department, domestic trade department and foreign trade department. After signing
contract, we will set up special team including engineers, installation technicians, drawing designer,
business person, after-sales service person, and so on. We will provide one-to-one service.
Our Service
Whole set of equipment for production line.
Motor and power control system.
Installation material.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
hole, construction.
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Main Business Field
CertificatesOur Certificates
Contact Information
Shandong Microwave Machinery Co.,Ltd.is a Pretreatment Processing Line factory specializing in the production of 10TPD-500TPD soybean oil processing plant cost, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Pretreatment Processing Linecustomers with design and services of 1-2000 tons 10TPD-500TPD soybean oil processing plant cost. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Pretreatment Processing Lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Pretreatment Processing Lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Pretreatment Processing Lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: sales10@ldfoodmachine.com
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)
Crispy Rice Food Processing Line
