English
See More
Canola oil extruder machine from Shandong Microwave Machinery Co.,Ltd.
Equipments of Canola oil extruder machine which directly related to the palm fruit oil process are divided into six systems as follows:
1.Fruit reception system of Canola oil extruder machine
1.1 Use truck to transport the ripe and fresh palm fruits from fruit ranch, weigh up them by platform scale and record, and then pour them into the discharging table.
1.2 Start control valve to open the discharging table, then fruit drop in the fruit basket car freely.
1.3 Drag the fruit basket car which loaded with fresh palm fruits to the downward of the bridge crane by power cable tray
and cable tray, then use bridge crane to sling the fruit basket car to the track lead to sterilizer sterilizing tank.
2. Sterilizer system of Canola oil extruder machine
2.1 After drag the fruit basket car into the sterilizer sterilizing tank, close the sterilizer sterilizing tank and open the vent
valve below it. Then inlet saturated vapor, close the vent valve after the cold air in the tank was excluded generally, and
enter into the period of steaming and sterilizing.
2.2 Close the inlet valve after the sterilizing process. Drain out the water and vapor in tank, then you can open the door of
the sterilizer sterilizing tank.
2.3 Drag the cooked fruit basket car to the downward of the beige crane.
3.Threshing system of Canola oil extruder machine
3.1 Pour the sterilized fruit in the fruit basket car into the unloading equipment.
3.2 Feed the fruit regularly into the fruit-separating machine to separate.
3.3 After twisting and beating in the fruit-separating machine, the fruits will fall off entirely.
4. Pressing system of Canola oil extruder machine
4.1 Palm fruit was transported to crasher by elevator.
4.2 Fruit was heated in crasher.
4.3 After sterilizing, the broken palm fruit flow into the palm oil press machine to pressing.
Canola oil extruder machine
Product DescriptionMain Economic and Technical Parameters of Rotocel Extractor
Capacity |
300T/D |
Residual oil in meal |
≤ 1% |
Solvent consumption |
≤ 2Kg/T (No.6 solvent oil) |
Crude oil moisture and volatile matter |
≤ 0.30% |
Power consumption |
≤ 15KWh/T |
Steam consumption |
≤ 280KG/T (0.8MPa) |
Finished meal moisture |
≤ 13% (adjustable) |
Residual solvent in finished meal |
≤300PPM (qualified detonated experiment |
Method of Canola oil extraction process
1) The material will be have a pretreatment process , we need to clean the canola , crush , cook , flaking , press the canola . the oil residue in the cake is about 7-8 % .this method is suitable for small capacity ,not large .
2) The method is pre -press and solvent extraction method .It means we press the canola first , then the oil residue left is about 12- 13% in the cake . Then we send the cake to extractor to leah the oil from the cake ,which make surethe oil residue is about 1 % . This method is for larger capacity ,and the invest is a little big .
Introduction of oil extraction
1) Function: Leaching system is an oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.
2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of low-oil-content materials.
(3) Main parts: The extraction series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
Main parts of canola oil extraction machine
Solvent pumps: continuously spray solvent to the rotary-type extractor
(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
(3). DTDC: usd to separate the solvent from the wet meal.
(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it.
The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.
(5). Miscella tank 2nd: the purified miscella will be pumped into it.
(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
Refinery Process
Crude canola oil - degumming ( remove phosphilid ) - decolorization ( remove pigment ) - deodorization ( remove odour )
Company Information
welcome to order from us
Shandong Microwave Machinery Co.,Ltd.is a crude palm kernel oil press production line factory specializing in the production of Canola oil extruder machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide crude palm kernel oil press production linecustomers with design and services of 1-2000 tons Canola oil extruder machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects crude palm kernel oil press production lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type crude palm kernel oil press production lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. crude palm kernel oil press production lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: sales10@ldfoodmachine.com
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)
Crispy Rice Food Processing Line
