English
See More
Top supplier of castor oil manufacturing process from Shandong Microwave Machinery Co.,Ltd.
Equipments of Top supplier of castor oil manufacturing process which directly related to the palm fruit oil process are divided into six systems as follows:
1.Fruit reception system of Top supplier of castor oil manufacturing process
1.1 Use truck to transport the ripe and fresh palm fruits from fruit ranch, weigh up them by platform scale and record, and then pour them into the discharging table.
1.2 Start control valve to open the discharging table, then fruit drop in the fruit basket car freely.
1.3 Drag the fruit basket car which loaded with fresh palm fruits to the downward of the bridge crane by power cable tray
and cable tray, then use bridge crane to sling the fruit basket car to the track lead to sterilizer sterilizing tank.
2. Sterilizer system of Top supplier of castor oil manufacturing process
2.1 After drag the fruit basket car into the sterilizer sterilizing tank, close the sterilizer sterilizing tank and open the vent
valve below it. Then inlet saturated vapor, close the vent valve after the cold air in the tank was excluded generally, and
enter into the period of steaming and sterilizing.
2.2 Close the inlet valve after the sterilizing process. Drain out the water and vapor in tank, then you can open the door of
the sterilizer sterilizing tank.
2.3 Drag the cooked fruit basket car to the downward of the beige crane.
3.Threshing system of Top supplier of castor oil manufacturing process
3.1 Pour the sterilized fruit in the fruit basket car into the unloading equipment.
3.2 Feed the fruit regularly into the fruit-separating machine to separate.
3.3 After twisting and beating in the fruit-separating machine, the fruits will fall off entirely.
4. Pressing system of Top supplier of castor oil manufacturing process
4.1 Palm fruit was transported to crasher by elevator.
4.2 Fruit was heated in crasher.
4.3 After sterilizing, the broken palm fruit flow into the palm oil press machine to pressing.
Top supplier of castor oil manufacturing process
Product Description
1.Castor Press flow chart:
Castor seed→ Cleaning→ RemoveStone→ Flaker → Cooking → Pre- press→ Crude oil filter → Castor cake → solvent extraction plant
Cleaning process: In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power and eLDaust system were used to remove iron. Dust removing wind net is installed.
Flaking Process: hydraulic compact roller flaker is used to ensure thin and uniform flake, with high toughness and small powder. the oil of raw material can be extracted in the shortest time and maximum, and residual oil was less than 1%
Cooking process : use vertical cooker,This process is heating and cooking for Castor seed which is easy to separate of oil and can provide the oil quantity from prepress machine.It is easy to operate and have long life.
Pre- press process: dopt the largest 202 prepress machine in China to squeeze out some of the oil fromthe high-oil materials, such as Castor seed etc.,The dry cake is loose
structured and not broken, easy for solvent premeability, with low residual oil and low running cost. But it still with 12-13% oil residual in the cake .then we send the cake to second presser
Crude Oil Filter First, use clarifying oil tank for primary settlement and filtering, and then use vertical blade filter for fine filtration. Try to reduce the cake residue in crude oil to ensure the following deguming effect
Packaging & Shipping
Our Services
Shandong Microwave Machinery Co.,Ltd.is a crude palm kernel oil press production line factory specializing in the production of Top supplier of castor oil manufacturing process, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide crude palm kernel oil press production linecustomers with design and services of 1-2000 tons Top supplier of castor oil manufacturing process. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects crude palm kernel oil press production lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type crude palm kernel oil press production lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. crude palm kernel oil press production lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: sales10@ldfoodmachine.com
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)
Crispy Rice Food Processing Line
