Why do you choose the Shandong Leader Machinery Co.,ltd. high quality canola oil production line canola oil manufacturing process canola oil production Line?
1.Healthy! Pure mechanical squeezing craft maximally keeps the nutrients of the oil plants.No chemical substances left
2. High working efficiency! Due to a high working efficiency of the screw oil press machinery,both time and power can be saved.
3. Long durability! All the parts are made of the most suitable material and treated with refined crafts, such as cemented quenching and tempering to increase the hardness, consequently the durability.
4. high quality canola oil production line canola oil manufacturing process canola oil production LineCost-effective! Low investment! The wearing parts on the oil press machinery such as the squeeze loop, squeeze spiral and squeeze bar are designed to be dismountable. When they are out of service period, users only need to replace them and there is no need to displace the whole machine.
Canola Oil Production Line
1 Inputting capacity of canola oil production Line
- Processing Capacity : 10TPD To 1000TPD
- Suitable Raw Materials: canola seed
2 Main Equipment of canola oil production Line
- Bucket Elevator
- Cleaning Sieving
- Destoner
- magnetic separator
- dehuller ( for some oil seeds)
- crusher/Flaker
- cooker
- Presser ( Expeller)
3 Description of canola oil production Line
LD And Oils Co.,Ltd is the leading Manufacture in Soybean Oil seeds Extraction and Crude Soybean Refinery in China.LD company has built thousands of oil seeds plant in all over the world during 60 years period. 
canola OIl Process steps in simple as follows : Bucket elevator is mainly used in elevating raw materials(fines,seeds)vertically.It is the self-cleaning type and easy to operating.
| Head roll |
diameter*width |
600*350mm |
| Covered with rubber material |
A3 anti-friction,imported rubber |
| Cover thickness of the rubber |
12-15mm |
| Hardness |
>=70Duro |
| Tail pulley |
diameter*width |
D600*350mm |
| Structural style |
Squirrel cage |
| Tensioning gear |
Shape |
Screw tensioning |
| Stroke of tension |
300mm |
| Holdback |
NYD85-D80 |
| Tacho-generator |
PNP/NO/DC24V/NI5-M12-OP6L |
| Off track sensor |
CDS 80C(optional ) |
| Explosion venting membrane |
Stainless steel(optional) |
soybean Oil seeds Cleaning sieving is specifically designed for the preliminary cleaning of all types of seeds at high flow rates in preparatory section. It effectively removes all size impurities from the seeds. The seed cleaner is fitted with an Aspiration channel for the removal of finer particles like husk, chaff etc. 
Soybean Destoner is used for the cleaning of and other granular products such as stones, mudballs, glass pieces, metal pieces etc… from the seeds. The machine is provided with 2 screens in the sieve box for effective separation of stones. Degree of separation can be optimized by individually adjusting screen inclination and air quantity.
Cracker Roller Mill with 4 rolls is used mainly in solvent extraction plants for the crushing of oil seeds. The rolls are pressed together mechanically by disc springs. The feed gate is adjustable to regulate the feed stock. Large doors arranged on both sides of the machine allow visual inspection and sampling
Model Item |
YPSG25×80 |
YPSG25×100 |
YPSG25×125 |
YPSG40×100 |
capacity(t/d) |
68-80 |
100-150 |
160-200 |
280-350 |
particle size after cracking(section) |
1/4-1/8 |
1/4-1/8 |
1/4-1/8 |
1/4-1/8 |
Fines content |
4% |
4% |
4% |
4% |
Speed ratio |
1:1.51 |
1:1.51 |
1:1.51 |
1:1.51 |
Pin roll specification(diameter×length)(mm) |
Φ250×800 |
Φ250×1000 |
Φ250×1250 |
Φ400×1000 |
Cooker is designed for the cooking and/or conditioning of oilseeds during the preparation process before the mechanical pressing or flaking. Vertical Cookers are multi staged and big size stages are used. Besides sterilizing and decontaminate the seeds, the cooking process is to provide the cooked seeds with plasticity to reduce the oil’s viscosity and clot the proteins
Model |
Capacity(t/d) |
Power(kw) |
Heating area (m2) |
softening |
cooking |
YZCL150×5 |
40-60 |
20-30 |
22 |
14.5 |
YZCL180×5 |
80-100 |
40-50 |
30 |
20 |
YZCL210×5 |
100-150 |
60-70 |
30 |
26.2 |
YZCL250×5 |
160-200 |
80-90 |
37 |
42 |
YZCL250×6 |
180-250 |
90-100 |
45 |
50.4 |
YZCL280×5 |
220-260 |
110-130 |
55 |
52 |
YZCL280×6 |
260-300 |
130-150 |
55 |
62 |
YZCL300×5 |
250-300 |
120-140 |
55 |
56.8 |
YZCL300×6 |
300-350 |
150-200 |
75 |
67 |
YZCL400×5 |
550-600 |
280-300 |
110 |
89.4 |
YZCL400×6 |
700-800 |
300-350 |
132 |
107 |
YZCL400×7 |
800-900 |
350-400 |
132 |
120 |
4 Solvent Extraction Plant of soybean Oil plant The Solvent Extraction processing Includes four sections: solvent extraction section; meal desolventizer; miscella oil distillation section ;solvent recovery section; Paraffin oil recovery system( recycle residual solvent)
Solvent Extractor The Extractor is the main equipment in a Solvent Extraction Plant. It is designed in perfect measurements so as to obtain high quality oil and minimum residual oil. The material is transported through the solvent spraying chamber and the speed of transportation can be varied easily. The machine is designed to give sufficient time for penetration and percolation of solvent into the raw material and to view the distribution, view glasses are provided.
Desolventiser-Toaster
The material obtained from the extractor has tendency to retain the solvent, and this solvent has to be recovered. The basic principle involved in Desolventiser Toaster is direct and indirect heating to remove all the residual solvent from the material
Condensers
Solvent Vapours are formed both in Desolventiser and distillation section and these are to be condensed. Adequate surface has been provided in the Condenser for complete condensation of solvent vapor.
Stripping Column
Stripping column is one of the main equipment in the Oiltek Distillation unit. The column is designed to strip the oil with live steam to remove any traces of solvent in the extracted oil.
5 Company Indroduction LD And Oils Machinery Co., Ltd. (short for HHFOME) is a manufacturing enterprise specialized in producing oil and cereal processing equipments in China. HHFOME consists of LD Huaxian Machine Factory, Huaxian Hangpeng Machinery Co., Ltd. and Beijing Huakang Xiwang Biological Technology Co., Ltd.. Established in 1988, HHFOME covers an area of 63,000 square meters and has 210 senior engineering technicians. Our company has 202 sets of automatic processing equipment. Processing capacity of our enterprise is more than 3000 sets every year. HHFOME has obtained independent export rights and has passed the evaluation of ISO9001:2000 Quality System Management Certification. We have got 22 national patents, 4 international awards, 2 national awards and 2 provincial awards.
Main Projects Scope:
-----30-5000T/D oilseeds pretreatment project
-----30-5000T/D oilseeds extraction project
-----10-500T/D crude oil refining project
-----10-500T/D crude oil fractionation project
-----Oil interesterification project
-----Oilseeds protein, phospholipid project
-----Natural pigment extraction project
----- deep processing project
Typical Project:
----30-1000T/D rice bran pretreatment, expanding, extraction project
----30-600T/D rice bran oil refining project
----150-1000T/D cottonseed dephenolizing protein
----10-120T/H palm fruit oil pressing project
----10-500T/D Non acid method biodiesel production project
----10-2000T/D corn deep processing project
Newest Technology:
---Energy saving oil vacuum deodorization technology
---Concentrated protein extraction technology
---Mixed oil extraction technology
---Mixed oil refining technology
---Molecular distillation technology
---Broken rice desaccharification technology
If you want to know more information about canola oil plant, please send E-mail to us E-mail: sales09(at)oilmachineworld.com Skype: LD-sales09 Mobile: 0086-18203651296 ( viber & whatsapp)Introduction of Shandong Leader Machinery Co.,ltd. high quality canola oil production line canola oil manufacturing process canola oil production Line
Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure.
Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, noncondensable gas exchanges heat with condensate from the evaporative condenser.
Finally, the condensate temperature discharged from energy saver is increased, and the solvent separated water from going to the solvent holding tank.
AAA1
Advantage of high quality canola oil production line canola oil manufacturing process canola oil production Line:
1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
2) Meal is send to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
AAA2
3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
4)The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
AAA3
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: sales9@ldfoodmachine.com
English
