English
See More
Tomato drying machine / tomato dryer are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Tomato drying machine / tomato dryer of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Tomato drying machine / tomato dryerfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Tomato drying machine / tomato dryer
Product Description
LD Tomato Dryer Introduction
LD heat pump dryer is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in a refrigerator.
| Dryer material | Galvanized steel (Stainless steel for option) | ||
| Drying chamber material | Polyurethane Two sides: steel |
||
| Heating source | 75% air source + 25% electric | ||
| Brand name | LD | ||
| Model number | JK03RD JK06RD JK10RD | ||
| Recommend dryer + drying chamber size | Description | Product Capacity | Drying Chamber size |
| One unit JK03RD dryer + drying chamber | 300Kg / batch | 3300*1900*2200mm | |
| One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm | |
| One unit JK10RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm | |
| Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm | |
| Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm | |
| Two units JK10RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm | |
Warm prompt: We can make any drying chamber sizes as your required.
Why choose LD heat pump tomato dryer?
| Various Drying EnerLD Economy Comparison Table | |||||||
| Heating Mode | Electric heating | Coal Boller | Oil-fired Boiler | Gas Boller | Biomass Stove | Regular heat pump dryer | LD Latest heat pump dryer |
| Remove 1kg of water required heat enerLD | According to information provided by the relevant authority of the document, the average 1kg of water to remove heat enerLD required for 1.35 kw/kg,namely 4860 kj/kg | ||||||
| Fuel type | Electric | Coal | Diesel | Gas | Biomass fuels | Electric | Electric |
| Heat value | 3600 kj/kg | 23027 kj/kg | 33494 kj/kg | 36006 kj/kg | 17459 kj/kg | 3600 kj/kg | 3600 kj/kg |
| Thermal efficiency | 95% | 30% | 85% | 85% | 90% | 350% | 400% |
| Effective thermal value | 3420 kj/kg | 6906 kj/kg | 28469 kj/kg | 30605 kj/kg | 15713 kj/kg | 12600 kj/kg | 14400 kj/kg |
| Fuel price | 0.1$ /kwh | 0.1$ /kg | 1.2$ /L | 0.8$ /m3 | 0.2$ /kg | 0.1$ /kwh | 0.1$ /kwh |
| Fuel consumption | 1.42kwh | 0.7kg | 0.17L | 0.159m3 | 0.375kg | 0.386kwh | 0.337kwh |
| Fuel consumption ($) | 1.42 | 0.7 | 1.26 | 0.795 | 0.37 | 0.39 | 0.33 |
| Labor management, warehousing costs | Higher | High | High | High | Low | Low | Low |
| Safety performance | Unsafe | Unsafe | Unsafe | Unsafe | Safe | Safe | Safe |
| Environmental pollution | None | Very serious | More serious | More serious | LigLD pollution | None | None |
| Life of equipment | 5-8 years | 6-9 years | 6-9 years | 6-9 years | 8-12 years | 10-15 years | 10-15 years |
LD Tomato Dryer Features
1. EnerLD saving & Environmental protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2. Running Stable, operating easily
PLC + Touch Screen, running stable, operating easily;
Adopt PLC control, can setting different drying curve,
Suitable for drying different materials.
3. Second waste heat recovery technoloLD (patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 40%.
4. Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80℃
5. Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
6. Safe and reliable operation, automatic intelligent control, 24-hour continuous drying.
Stable operation without being influenced by weather
7. Wide application, can be used in agricultural products, seafood, fruits and vegetables, fish, meat, nut, herb, wood drying systeLD
Successful projects
Technical Parameters
| Model | JK03RD | JK06RD | JK10RD | |
| Suitable for drying chamber | m3 | 10~20 | 20~30 | 30~40 |
| Power supply | V/PH/HZ | 380/3/50 or 220/1PH/50 | 380/3/50 | 380/3/50 |
| Power input | KW | 2.8 | 5.8 | 10.8 |
| Running current | A | 8/17 | 12.6 | 22.5 |
| Auxiliary electric heater(option) | KW | 9 | 9 | 9 |
| Heating capacity | KW | 12 | 26 | 35 |
| Cooling capacity | KW | 7.5 | 20 | 25 |
| Dehumidification amount | L/H | 8 | 20 | 40 |
| Max. hot air Temperature | °C | 75 | 75 | 75 |
| Working ambient temperature | °C | -10~45 | -10~45 | -10~45 |
| Refrigerant | Kg | Mixture type/2.5 | Mixture type/4.3 | Mixture type/8.0 |
| Compressor | Type | Scroll | Scroll | Scroll |
| Brand | Copeland/Danfoss | Copeland/Danfoss | Copeland/Danfoss | |
| Quantity | 1 | 1 | 2 | |
| Noise | dB(A) | 60 | 65 | 70 |
| Fan motor for drying | Power input/unit | 250W/unit | 250W/unit | 250W/unit |
| Wind volume | m3/H | m3/H | 2500m3/H/unit | |
| Recommend qty | 8 | 8 | 16units | |
| Heat regenerator size | mm | 500*350*350 | 500*500*580 | 550*600*680 |
| Fan motor for heat regenerator (dehumidify) |
Power input | 200W | 370W | 550W |
| Wind volume | 2000m3/H | 2000m3/H | 3500m3/H | |
| Size(mm) | 450*330*380 | 470*320*470 | 580*320*580 | |
| Wind valve | Power input | 6W | 6W | 6W |
| OPEN | Exchange fresh air | Exchange fresh air | Exchange fresh air | |
| CLOSE | Drying | Drying | Drying | |
| Size(mm) | 480*320*120 | 630*560*120 | 720*640*125 | |
| Fan motor for evaporator (2 units) |
Power input | 250W/unit | 780W/unit | 780W/unit |
| Wind volume | 4600m3/H | 10500m3/H | 2*10500m3/H | |
| Rotate speed | 1350RPM | 1350R/Min | 1350R/Min | |
| Hot air outlet | mm | 600*1100 | 650*1100 | 860*1485 |
| Hot air return inlet | mm | 690*1100 | 750*1100 | 1050*1450 |
| Dimension(L*W*H) | mm | 1650*960*1280 | 1720*1160*1280 | 2100*1460*1590 |
| Net weigLD | Kg | 210 | 385 | 480 |
| Gross weigLD | Kg | 240 | 420 | 540 |
Packaging & Shipping
Packaging Details
Our Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
Crispy Rice Food Processing Line
