2015china LD selling beef jerky drying machine/meat dryer are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
2015china LD selling beef jerky drying machine/meat dryer of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
2015china LD selling beef jerky drying machine/meat dryerfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
2015 china LD selling beef jerky drying machine/meat dryer
Product Description What is LD heat pump dryer machine and working principle?heat pump dryer is use of reverse Carnot principle .With free air to absorb heat and transfer it to the drying chamber, drying room temperature to achieve improved, with the appropriate humidity and dehumidification equipment to achieve dry materials. heat pump dryer Compressor - heat exchangers - Chokes - heat sink (outside the machine) - Compressor and other devices constitute a refrigerant cycle system. Under the action of the compressor in the refrigerant circulating in the system flow, it is done in the gaseous booster compressor heating process (temperature up to 100 ℃), releasing it into the machine dry in room temperature air heated by the heat, while they have been and converted to liquid cooling flow, when it runs out machines, liquid absorbs heat quickly evaporates once again transformed into a gaseous state, while the temperature dropped to minus 20 ℃ --30 ℃, then the air around the heat sink will continuously transferring heat to the refrigerant. Refrigerant continuous cycle to achieve the heat in the air transport to the drying room heating room air temperature to achieve the purpose of dry material.
LD heat pump dryer machine function:
Heating drying
Cooling drying
Heating drying + dehumidify
With traditional drying technoloLD comparison:
1.For traditional drying technoloLDCurrently, most of dehydrated fruits, vegetable is still using the traditional drying methods - sun, coal, wood, and fire back to Long Road heated drying room drying method, all of them out of the following probleLD :
1)the drying temperature is too high. The traditional drying techniques is difficult to control the drying temperature, drying temperatures are generally around 75-90 ℃, and dehydrated fruits and vegetables drying process requires drying temperature should not exceed 65 ℃.
2)the drying time is too long. Conventional drying technoloLD, each processing one ton of vegetables need at least more than 24h, sometimes due to the drying effect is not good to be reworked, the time required for longer.
3)power-hungry. Conventional drying technoloLD, thermal efficiency are low, about 30% -60%, in the drying process, accounting for about 36% of the dry heat of vaporization of water, accounting for about 58% of the exhaust gas losses, take the heat and dry materials dryer heat loss accounted for 2% and 2%, respectively, the thermal efficiency of only 40%.
2.For Heat pump drying technoloLD
1, the drying temperature is low. Heat pump drying technoloLD production processes around 38-52 ℃ lower than conventional drying techniques, namely the heat pump heating and drying technoloLD temperature around 37 ℃ -65 ℃.
Our heat pump dryer model for clients choose:
NEW TYPE HEAT PUMP DRYER MODEL |
IteLD |
Unit |
JK03RD |
JK06RD |
JK10RD |
JK12RD |
Production capacity |
1set |
300kg |
600kg |
1000kg |
1200kg |
2 sets |
600kg |
1200kg |
2000kg |
2500kg |
Suitable drying chamber size |
M3 |
10-30 |
30-40 |
40-50 |
60-70 |
Heating capacity |
Kw/h |
12 |
26 |
35 |
42 |
Cooling capacity |
Kw/h |
7.5 |
15 |
25 |
30 |
Dehumidification amount |
L/H |
10 |
25 |
50 |
60 |
Input power
|
Compressor |
kw
|
2.8 |
5.3 |
9.3 |
11.2 |
Evaporator fan motors |
0.78 |
0.78 |
1.5 |
1.5 |
Hot air circulating fan |
2 |
2 |
2 |
2 |
Dehumidify fan motor |
0.37 |
0.37 |
0.55 |
0.55 |
Auxiliary electric heater |
3 |
6 |
9 |
9 |
Power supply |
kw |
220v/380v |
380v/3ph/50hz or 60hz |
Total running current |
A |
35/20 |
30 |
45 |
45 |
Max hot air temperature |
℃ |
75 |
Min cooling temperature |
℃ |
8 |
Working ambient temperature |
℃ |
-10-45 |
Mixture Refrigerant |
kg |
2.5 |
4.5 |
8 |
9.75 |
WeigLD |
kg |
210 |
385 |
480 |
500 |
Dimension
|
length |
mm
|
1650 |
1730 |
2100 |
2179 |
Width |
960 |
1220 |
1460 |
1356 |
HeigLD |
1280 |
1280 |
1590 |
1930 |
FOB LD price |
USD |
|
|
|
|
Our dried fruits &vegetables&fishes &meat projects:
Our service and shipment:
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.