English
See More
Introduction of China factory supply Noodle Making Machine for Noodle:
1>. China factory supply Noodle Making Machine for Noodle have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2>. Shandong Leader Machinery Co.,Ltd. use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.
Working principle of Auxiliary Machine For Oil Press:
1. Transferred by the triangle belt, the electromotor drives the spiral shaft.
2. Oil plants being carried toward to the end of the machine by rotating squeeze spirals.
3. With the space between spirals and loops becoming smaller,the pressure in the chest is bigger.
4. During this process, oil plants are smashed and the tissue cells are destroyed, then oil is separated from oil plants.
5. After extracted, oil plants turns to be cakes containing low oil and is discharged in thin slices from the end.
China factory supply Noodle Making Machine for Noodle
Product Description
Description for Making Machine for Noodle:
1.Small Noodle Making Machine type introduce
There are 2 types of home use eletric noodle making machine, GLMT Type is with electroplating,the roller and cutter won't rust,not as the normal type;GLMT-140/156/180F Type is a new improved type,full sealed,more safe during operation.
For example,GLMT-140(on the left) and GLMT-140F(on the right) as below
2.Small noodle making machine capacity reference for client
GLMT-140/GLMT-140F suits for 2-3person family
GLMT-156/GLMT-156F suits for 2-6person family
GLMT-180/GLMT-180F suits for 2-10person family
GLMT-200 suits for 10-30person family
GLRM-200 suits for 10-50person family
Features of Making Machine for Noodle
1.Small size,easy operation;
2.High efficiency,low noise;
3.Home use,save labor;
4.one machine with one set cutter,cutter width adjustable.(Thin noodle cutter 2*6mm or coarse noodle cutter 3*9mm). You also can choose other cutter depends on your machine.
Technical data for Making Machine for Noodle
Model |
Capacity(kg/h) |
Size(cm) |
Weight(kg) |
Power(W) |
Voltage |
Note |
GLMT-140 |
âÂÂ¥20 |
34*34*27 |
19 |
150 |
220V,50hz |
Material: Cast iron gear,steel bearings |
GLMT-156 |
âÂÂ¥25 |
36*34*27 |
20 |
150 |
220V,50hz |
|
GLMT-180 |
âÂÂ¥30 |
38*34*27 |
21 |
180 |
220V,50hz |
|
GLMT-180 |
âÂÂ¥32 |
38*34*27 |
22 |
370 |
220V,50hz |
|
GLMT-200 |
âÂÂ¥35 |
43*42*30 |
33 |
550 |
220V,50hz |
|
GLRM-200 |
âÂÂ¥40(roller gap range 1-12mm) |
45*43*32 |
36 |
550 |
220V,50hz |
|
GLMT-140F |
âÂÂ¥20 |
40*35*36 |
19 |
150 |
220V,50hz |
Material: Cast iron gear,steel bearings,engineering plastic |
GLMT-156F |
âÂÂ¥25 |
40*37*36 |
20 |
180 |
220V,50hz |
|
GLMT-180F |
âÂÂ¥30 |
40*39*36 |
21 |
180 |
220V,50hz |
Structure pictures of Making Machine for Noodle
550W Motor-GLMT-200/GLRM-200
Motor and Double Belt
Full Cast Iron Gear
GLMT-180-2 Model Structure 370W Motor
Other model pictures of Making Machine for Noodle
GLMT-140F Model Pictures as below
GLMT-156F Model
GLMT-180 Model
GLMT-180F Model
GLRM-200 Model Making Machine for Noodle
FAQFAQ for noodle making machine for noodle:
1. How to adjust the cutter width when use the adjustable cutter?
Answer: If 2*6mm cutter(3*9mm cutter),adjust the front two red knob on the cutter, all relaxed out to get the 2MM width(3MM width), and tightened up to get the 6MM width (9mm width )noodles.
2. How to adjust the thickness of the roller?
Answer: Adjust the red knob on the roller,adjust range 1-5mm for GLMT type,that's noodle sheet thickness 1-5mm. But for GLRM-200,roller gap range 1-12mm adjustable,not only can make noodle,but also can roll dough and press pastry or dough slice.
3. Noodle sheet run with deviation or become wave?
Answer: the sheet thickness is inconsistent, or too soft, scraper loose or deformed. If inconsistent,should adjust the regulating handle to make one side partial thicker; If too soft, should with dry flour after re pressing; If scraper loosen,should make it re-back to roller groove, check the scraper to make its blade no gap between the roll.
4. How about Cutter choice?
Answer: Standard configuration:width adjustable knife, coarse double cutter 3 mm* 9 mm, thin double cutter 2 mm*6 mm. Other cutter size you need,please confirm with me.
Crispy Rice Food Processing Line
