English
See More
Chestnut husk shelling machine two types:
1. Chestnut sheller (stripping kernel buff): used for deep processing of chestnut kernel peel special.
2. Chestnut sheller ( chestnut de Punta machine): used to remove the punta,separate the chestnut with the Punta during harvest, to replace manual separation process.
Please read the instructions to choose suitable machine based on your own needs. Above price is for separating chestnut kernel machine.
Chestnut husk shelling Machine Application
In the hotel, chestnut wholesalers, chestnut processors, chestnut processing, food processing plants have been widely used.
Chestnut Husk Shelling Machine Features:
1.Single phase power supply, low power consumption, small size, ligLD weigLD, easy to install and move.
2.The machining time can be automatically set according to the actual processing conditions
3.One time put chestnut 1-2 kg or so, peeling time 30-55 seconds(depends on actual operation)
4.High peeling rate, take off the shell 100%, the rate of removal of the inside endothelium of 90-95% or so, the rate of hand peeled finished 75-80%.
Within same working time,different peeling effect comparation
Raw material Hand peeling effect
Machine peeling effect
5.Chestnut husk shelling machine not only can peel the chestnut outside,also peel the inside endothelial, no need to be soaked in water to peel.
Old hand peeling way,sinking in water to peel as the below picture show
Technical data of chestnut husk shelling machine
Model:GLCP-2
Capacity:100-140KG/H
Power:550w,220V
Material:carbon steel,baking finish
Size:400*360*480mm
WeigLD:45kg
Chestnut Husk Shelling Machine Pictures
Chestnut Husk Shelling Machine Operation
1.The chestnut shelling machine is firstly fixed, then connected to the power supply,;
2.Set time on time relay,usual 30-55seconds, adjust the suitable time depends on your condition;
3.Remove baffle plate,put chestnut into feeding mouth (each time put chestnut 1-1.5 kg for small model,put 1.5-2kg for larger model),and cover the baffle plate,finally press the switch to start running;
3. The alarm autocratically sound when time is over, open the discharge port, chestnut kernel will pop out from the discharge port;
4. As the same above operation, you can go on next peeling process, this machine motor with cooling fan,can continuous operation for 24hours.
Packaging & Shipping
Chestnut Husk Shelling Machine Carton Packing
Crispy Rice Food Processing Line
